Ariens 915143-Zoom 50 Specifications download pdf (Page 11)

INSTALL BAG ON FRAME (FIGURE 10)

1. Thread the bag frames (item 8) through the sleeve

on the open end of the mesh bag (item 10).

2. Install the 3/8 x 1/2 x 3" plastic tubes (item 9) on the

ends of the bag frames (item 8) and push the ends

together.

NOTE: The rope handle on the bottom of the bag will

point to the outside when the bag is assembled correctly.

INSTALL MESH BAGS (FIGURE 11)

1. Install mesh bags (item 10) on bagger frame. Make

sure that the heat-resistant side of the mesh bags

face the unit.

Install Hose

1. Trim off 3" of hose before installing.

2. Install bagger hose (item 11) on bagger boot

assembly and bagger cover assembly.

3. Flip up thumb latch and push bagger hose into the

latch. Flip down the latch, making sure the latch is

attached to a rib on the hose See Figure 12.

Thread bag frame (item 8) through

sleeve in mesh bag (item 10).

Install 3/8 x 1/2 x 3" plastic tube

(item 9) on each end of frame and

push the ends together.

Figure 10

CAUTION: MAKE SURE the heat resistant

(smooth side) side of the mesh bags are facing

the unit.

Figure 11

MAKE SURE the heat

resistant side (smooth side)

faces the unit.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 21 22

No comments

Ariens 915143-Zoom 50 Specifications Page 11