Ariens 911252 - Pro21 Specifications download pdf (Page 22)

GB - 22

To install the drive belt:

IMPORTANT: Be sure the belt seats in idler

and pulley grooves with the idler touching the

back (flat) side of belt.

1. Install the new belt on the transmission

input pulley and idlers, route it through

the belt channel, and then install the belt

on the engine pulley. See Figure 20 and

Figure 21.

NOTE: Make the sure the belt is inside the

two belt fingers near the engine pulley.

2. Position the bent belt finger so it lightly

contacts the belt, and then tighten it in

position.

3. Connect the wheel drive cable spring to

the idler arm as shown in Figure 22, and

then connect the wheel drive cable to

the transmission mount. See Figure 19.

4. Connect the idler return spring to the

idler arm.

5. Install the wave washer and blade

adapter on the crankshaft.

6. Install the center baffle on the mower

deck.

7. Install the blade on the blade adapter.

Make sure the blade hardware is

tightened to the proper torque. See To

install blade: on page 19.

Figure 20

1. Drive Belt

2. Engine Pulley

3. Bent Belt Finger

4. Belt Channel

4

3

2

1

Figure 21

Note belt routing around

idlers and belt fingers.

Push belt through

belt channel and

install it on the

engine pulley.

Figure 22

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Comments to this Manuals

No comments