Ariens SNO-THRO 937 User Manual download pdf (Page 4)

Safety Precautions (Continued)

Wear eye protection such as safety goggles to

protect eyes from objects that may be thrown from

machine.

DO NOT wear loose clothing or scarves that may get

caught in rotating parts of unit.

Gasoline is highly flammable and its vapors are

explosive. Handle with care. Use an approved

(RED) fuel container.

NEVER allow smoking materials, sparks or flame

(match, pilot light, etc.) near equipment or fuel

container.

Check fuel supply before starting engine. Fill fuel

tank outdoors with extreme care; DO NOT fill fuel

tank indoors, when engine is running or while engine

is still hot from operation. Replace fuel cap securely

and wipe spilled fuel before starting engine.

DO NOT use unit on loose gravel that may be picked

up and thrown out discharge chute causing damage

or injury.

NEVER attempt to make any adjustments to unit

while engine is running (except where specifically

recommended).

Operation

DO NOT put hands or feet near rotating parts,

clear of discharge opening at all times.

Keep

Check function of all controls before starting engine.

Keep all safety devices and guards in position and

operating properly or personal injury may result.

Open doors if engine is run in garage, exhaust fumes

are dangerous. DO NOT run engine in an enclosed

area.

Operate equipment only when there is good visibility

and tight.

Always be sure of your footing (walk never run).

Exercise caution to avoid slipping or falling.

Disengage power to auger/impeller when unit is

being transported or is not in use.

DO NOT overload machine capacity by attempting to

clear snow at too fast a rate.

NEVER direct discharge of material toward

bystanders nor allow anyone in front of equipment

while unit is in operation. Be familiar with area of

operation.

Stay alert for holes, rocks, roots and hidden hazards

in area of operation.

Exercise extreme caution when operating on or

crossing gravel drives, walks or roads. Stay alert for

hazards and traffic. DO NOT operate unit near glass

enclosures, automobiles, window wells, drop-offs,

etc., without proper adjustment of discharge direction

and angle.

DO NOT clear snow across face of slopes. Exercise

extreme caution when changing direction on slopes.

DO NOT attempt to clear steep slopes.

Stop engine, remove key and wait for moving parts to

stop before leaving operator's position for any reason

such as; unclogging auger/impeller housing or

discharge chute, when making any repairs,

adjustments, inspections or cleaning unit.

DO NOT touch equipment parts which might be hot

from operation. Before attempting to maintain, adjust

or service allow such parts to cool.

If equipment vibrates abnormally, disengage

attachment, stop engine at once, and remove key.

Abnormal vibration is a warning of trouble. Repair

any damage before restarting unit.

After striking a foreign object, stop engine, remove

key and wait for moving parts to stop before leaving

operator's position. Thoroughly inspect unit for any

damage and repair damage before restarting and

operating unit.

Run unit a few minutes after throwing snow to

prevent freeze up of auger/impeller in housing.

Take all possible precautions when leaving unit

unattended, such as disengaging power to

attachment, stopping engine and removing key to

prevent unauthorized use.

1 2 3 4 5 6 7 8 9 ... 16 17

Comments to this Manuals

No comments

Ariens SNO-THRO 937 User Manual Page 4

Comments to this Manuals

Related products and manuals for Gardening equipment Ariens SNO-THRO 937