Ariens 929001 User Manual download pdf (Page 43)

FILLER AND OIL LEVEL PLUG ON]

Figure 47

IHYDROSTATIC DIFFERENTIAL

----------

--------------

------------- -- -- ----------------- bX Tb

FILL FUEL TANK

Fill fuel tank with clean, fresh, regular grade gasoline. Do

not use premium gasoline.

ADJUST TIRE PRESSURE

Tires are over-inflated for shipping purposes. Correct tire

pressures are essential for proper handling or attachment

performance. Adjust tire pressures as shown in the chart. Use

a low pressure gauge for accurate readings.

DESCRIPTION

LAWN

SNOW THROWER AND

WORK

FRONT BLADE WORK

Front tires (15 x 6.00-6)

¡Rear tires (20 x 8.00-10) 6

ASSEMBLE MOWER

1. Remove shipping straps from front support bar and belt

idler.

ATTACH MOWER TO THE TRACTOR

Use the following procedure to attach the mower to the

tractor:

1. Remove ignition key. Place implement power clutch lever

in the disengaged position and engage the tractor brake

lock.

CUTTING HEIGHT

ADJUSTMENT LEVER

IMPLEMENT POWER CLUTCH

2. Raise the tractor attachment lift lever.

3. Place cutting height adjustment lever in the second lowest

cutting position as shown in Figure 48.

4. Raise front support bar to clear the front tractor tire and

slide the mower under the tractor from the right side.

5. Place the drive belt over the rear lift point and lower the

attachment lift lever. Align ball joint of rear lift point to

tractor lift arms and secure with the "L" shape attaching

pin and hairpin cotter provided. See Figure 48.

6. Position drive belt over the drive and driven sheaves and

place idler to the inside of the belt as shown in Figure 48.

7. Position front support bar in the tractor saddle brackets

and secure with the locks and latches as shown in Figure 49.

FRONT SUPPORT

Figure 49

ADJUST BLADE LEVEL AND PITCH

IMPORTANT: ADJUST MOWER BLADE LEVEL

AND PITCH AS OUTLINED IN THE OWNER'S

MANUAL.

DELIVERY

u w, 'WFRONT support bar

I nwccT \ "L" SHAPED \\%^Xi

LUWti I attaching pin^tractor lift arms

CUTTING

POSITION

AND HAIR PINv

COTTER

Figure 48

Using the Owner's Manual as a guide, instruct the customer

as follows:

1. Instruct the customer on the operation of the tractor.

Emphasize safety and discuss the safety information in

the Owner's Manual.

2. Advise customer to change oil in the engine crankcase

after the first five hours of operation.

3. Advise customer to change the transmission oil filter after

the first five hours operation.

4. Explain how to perform the recommended lubrication

and periodic service.

5. Explain maintenance and adjustment instructions.

6. Demonstrate how to mount and dismount attachments.

7. Make certain the customer has his Owner's Manual.

8. Explain Ariens Warranty Policy. Fill out and return Ariens

Warranty Registration Card.

1 2 ... 38 39 40 41 42 43

Comments to this Manuals

No comments

Ariens 929001 User Manual Page 43

Comments to this Manuals

Related products and manuals for Gardening equipment Ariens 929001