Ariens 915057 - 2148 Specifications download pdf (Page 24)

GB - 24

TROUBLESHOOTING

PROBLEM PROBABLE CAUSE CORRECTION

Engine will

not

crank/start.

1. Safety interlock system is not

engaged or is faulty.

1. Check safety interlock system

(see Safety Interlock System on

page 11).

2. Fuel tanks empty. 2. Fill fuel tanks (see FILLING FUEL

TANKS on page 13).

3. Fuel shut-off valve closed. 3. Open fuel shut-off valve.

4. Discharged battery. 4. Charge battery (see Charging the

Battery on page 21).

5. Poor connection between battery

and battery cables.

5. Tighten battery cables and/or

clean battery and battery cables

(see Cleaning Battery and Battery

Cables on page 21).

6. Spark plug wire(s) loose or spark

plug(s) faulty.

6. Connect spark plug wire(s) or

replace spark plug(s). Refer to

Engine Manual for detailed

instructions.

7. Faulty electrical system. 7. Contact your Ariens Dealer.

8. Faulty engine. 8. Contact your Ariens Dealer.

Engine

runs

rough.

1. Choke engaged. 1. Disengage choke.

2. Air filter cartridge plugged. 2. Clean or replace air filter

cartridge. Refer to Engine Manual

for detailed instructions.

3. Faulty engine. 3. Contact your Ariens Dealer.

Unit does

not move

with engine

running

when using

steering

levers.

1. The transmission bypass lever is

engaged.

1. Disengage transmission bypass

lever (see on page 15).

2. Faulty hydrostatic belt. 2. Replace hydrostatic belt (see

REPLACING HYDROSTATIC

BELT on page 23).

3. Faulty transmission. 3. Contact your Ariens Dealer.

PTO or

mower

blades do

not engage

or shuts off.

1. Operator presence switch not

depressed.

1. Depress operator presence switch

by sitting on seat.

2. Faulty operator presence switch. 2. Contact your Ariens Dealer.

3. Electric clutch connector is loose

or disconnected.

3. Connect the electric clutch

connector. See REPLACING

HYDROSTATIC BELT on

page 23 for the electric clutch

connector location.

4. Faulty PTO belt. 4. Replace PTO belt (see

REPLACING PTO BELT on

page 22).

5. Faulty PTO switch, wires,

connectors, or clutch.

5. Contact your Ariens Dealer.

Engine

overheats.

1. Engine oil level low. 1. Add engine oil. Refer to Engine

Manual for detailed instructions.

2. Cooling system plugged. 2. Clean cooling system. Refer to

Engine Manual for detailed

instructions.

3. Faulty engine. 3. Contact your Ariens Dealer.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments

Ariens 915057 - 2148 Specifications Page 24

Comments to this Manuals

Related products and manuals for Lawnmowers Ariens 915057 - 2148