Ariens 915057 - 2148 Specifications download pdf (Page 20)

GB - 20

ADJUSTING ANTI-SCALP

ROLLER

NOTE: The anti-scalp rollers are intended to

prevent lawn scalping, not to control cutting

height. All anti-scalp rollers should be set at

the same height.

See figure 16 for anti-scalp locations on

models 915067, 055, 057, 059, 501. See

figure 17 for anti-scalp locations on models

915065 and 502.

There are two positions:

• Highest Position: Use to disable

anti-scalp feature.

• Lowest Position: Use for all cutting

positions.

In the lowest position the anti-scalp rollers will

touch the ground.

SERVING BATTERY

NOTE: Unit comes equipped with a

maintenance-free battery that requires no

regular maintenance except cleaning the

terminals.

Battery Removal and Installation

Remove (Figure 18)

1. Tip seat forward (see TIPPING SEAT

FORWARD on page 16).

2. Disconnect negative (–) cable first, then

positive (+) cable.

3. Remove battery hold-down bracket and

battery from unit.

Install (Figure 18)

1. Install battery on the unit with battery

hold-down bracket.

2. Connect positive (+) cable first, then

negative (–) cable.

3. Apply petroleum jelly or dielectric grease

to battery cable ends and terminals.

Figure 16

OE0038

1. Anti-scalp

Roller

2. Lowest Position

3. Highest

Position

Models 915067, 055, 057, 059, 501

WARNING: Battery posts, terminals

and related accessories contain lead

and lead compounds, chemicals

known to the State of California to

cause cancer and reproductive harm.

Wash hands after handling.

Figure 17

OE0310

1. Anti-scalp Roller

2. Lowest Position

3. Highest Position

Models 915065 and 502

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

Comments to this Manuals

No comments

Ariens 915057 - 2148 Specifications Page 20

Comments to this Manuals

Related products and manuals for Lawnmowers Ariens 915057 - 2148