Ariens 915057 - 2148 Specifications download pdf (Page 16)

GB - 16

TIPPING SEAT FORWARD

Remove clamping knob (915065, 067, 055,

057, 059) or flat washer and nut (915501,

502) and tip seat forward to access the

battery and engine.

NOTE: Models 915501 and 502 must use the

flat washer and nut to secure the seat to the

unit.

Tip seat back and secure to unit with

clamping knob (915065, 067, 055, 057, 059)

or flat washer and nut (915501, 502)

(figure 9).

OPENING AND CLOSING HOOD

To open, pull up on the front of the hood to

open and push down on top of hood to close

until hood snaps into hood clips (figure 10).

Each Use

Engine

Manual

Maintenance

Schedule

Perform scheduled

engine maintenance.

Refer to Engine

Manual for detailed

instructions.

NOTE: To drain the

oil, use the oil drain

petcock (1) supplied

with unit, not the

drain plug that is

shown in the Engine

Manual.

25 Hours

or Every

Season

Check

Battery

Keep battery and battery terminals clean (see Cleaning Battery

and Battery Cables on page 21).

Lubricate

Unit

Apply grease to zerk (1) on

each front wheel

50 Hours

or Every

Season

Check

Fasteners

Check mower blade mounting hardware and all other fasteners.

Replace fasteners that are missing or damaged. Tighten all nuts

and bolts to the correct torque value.

100 Hours

or Every

Season

Check All

Belts

Replace worn or deteriorated belts.

• Check hydrostatic belt (see REPLACING HYDROSTATIC

BELT on page 23 for hydrostatic belt location).

• Check PTO belt (see REPLACING PTO BELT on page 22

for PTO belt location).

Interval Task Action

SERVICE AND ADJUSTMENTS

WARNING: AVOID INJURY. Read

and understand the entire Safety

section before proceeding.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

Comments to this Manuals

No comments

Ariens 915057 - 2148 Specifications Page 16

Comments to this Manuals

Related products and manuals for Lawnmowers Ariens 915057 - 2148