Ariens 915057 - 2148 Specifications download pdf (Page 15)

GB - 15

Stopping the Engine

1. Stop unit.

2. Disengage PTO.

3. Set throttle lever to slow.

4. Turn ignition switch to off position and

remove key.

5. Set parking brake.

OPERATING MOWER

1. Start engine.

2. Set throttle lever to fast.

IMPORTANT: Never engage PTO if mower is

plugged with grass or other material.

3. Engage PTO to start mower blades.

NOTE: The parking brake must be

disengaged prior to moving the steering

levers from the neutral lockout position.

4. Release parking brake.

5. Use steering levers to move the unit.

6. Disengage PTO to stop mower blades.

TRANSPORTING UNIT

ALWAYS shut off engine, set parking brake,

remove key, and close fuel shut-off valve or

drain fuel when transporting unit on a truck or

trailer. Tie unit down securely. Do not tie

down by linkages, guards, cables or other

parts that may be damaged.

FOR BEST PERFORMANCE

Cut grass when it is dry.

Keep mower blades sharp.

Keep mower deck properly leveled.

Adjust anti-scalp rollers to prevent scalping.

Do not set height of cut too low. For very tall

grass, mow twice.

Do not travel too fast.

Mow with the engine set at full throttle.

When mulching, only remove 1/3 of grass

length per cutting.

Discharge clippings into areas already cut.

Vary cutting pattern with each mowing.

Do not allow grass or debris to collect inside

of mower deck. Clean after each use.

IMPORTANT: Proper maintenance can

prolong the life of unit. The following chart

shows the recommended service schedule.

Refer to the maintenance instructions in the

Engine Manual for additional information.

NOTE: To have full access to the engine, the

seat must be tipped forward (see TIPPING

SEAT FORWARD on page 16) and the hood

opened (see on page 17).

MAINTENANCE SCHEDULE

WARNING: AVOID INJURY. Read

and understand the entire Safety

section before proceeding.

Interval Task Action

Each Use

Check Safety

Interlock

System

WARNING: Safety interlock system failure and

improper operation of unit can result in death or

serious injury. Test this system each time the unit is

operated. If this system does not function as

described, do not operate until repairs are made (see

Safety Interlock System on page 11).

Check

Parking

Brake

Engage parking brake and engage transmission bypass lever

(see on page 15). Push unit. If unit rolls, contact your Ariens

Dealer.

Clean Unit Clean engine, battery, seat, mower deck, etc. of all dirt and

debris. Do not use solvents, hard cleaners, or abrasives.

NOTE: Protect painted surfaces with automotive type wax.

Check Tires See SPECIFICATIONS on page 27 for correct tire pressure.

Check

Mower

Blades

Check for worn or damaged mower blades (see SHARPENING

MOWER BLADE on page 19).

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

Comments to this Manuals

No comments

Ariens 915057 - 2148 Specifications Page 15

Comments to this Manuals

Related products and manuals for Lawnmowers Ariens 915057 - 2148