Ariens Zoom XL 54 Specifications download pdf (Page 15)

EN - 15

Timer (TMR1): measures the time spent on

individual jobs.

Press and hold the toggle button to reset the

timer to zero. TMR1 will then start measuring

engine run time until it is reset to zero again.

Service Alert (Chg Oil, Chg H Oil & Filter,

SVC Airfilter): reminds operators of the

maintenance interval for changing the engine

oil, changing the hydraulic oil and filter and

servicing the air filter.

The alert starts counting down two hours

before the maintenance is due. The meter

flashes the word, "Now," when it reaches the

maintenance time.

Press and hold the toggle button to reset the

maintenance clock to zero after performing

the service.

NOTICE: The hour meter is preprogrammed

for the initial oil change at 25 hours and for

100 hours thereafter. The hour meter is

programmed for the initial hydraulic oil and

filter change at 75 hours and for 400 hours

thereafter.

Steering Levers

• Reverse (1) – Pull both steering levers

backward.

• Forward (2) – Push both steering

levers forward.

• Left (3) – Pull left steering lever back

or push right steering lever forward or

a combination of both.

• Right (4) – Pull right steering lever

back or push left steering lever forward

or a combination of both.

NOTICE: To stop, return both steering levers

to neutral.

NOTICE: The steering levers must be in the

neutral position to start the engine.

NOTICE: The parking brake must be

disengaged prior to moving the steering

levers from the neutral position.

Mower Lift Pedal

Figure 6

Raises and lowers the deck.

NOTICE: The height of cut lever is used to

set the height of the mower deck. See

Specifications on page 32 for cutting height

dimensions.

Press mower lift pedal and place height of cut

lever to desired adjustment notch.

NOTICE: Adjusting the seat further forward

will help increase the leverage in lifting the

mower deck (see Adjusting Seat on page 16).

Display

Toggle Button

1

2

3

4

Figure 6

1. Height of Cut Lever

2. Mower Lift Pedal

3. Adjustment Bracket

1

2

3

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 35 36

Comments to this Manuals

No comments