Ariens A149K21 (96136000) Owner's Manual download pdf (Page 13)

•1=WARNING: To avoid serious iniury, Mowing

before performing any service and A po,sition

adjustments:

1. Release control bar and stop engine.

2. Make sure the blade and all moving

parts have completely stopped.

3. Disconnect spark plug wire from spark

plug and place wire where it cannot Hairpin

come in contact with plug. c°tter"--_

Mounting-'3

pin

LAWN MOWER

-TOADJUST CUTTING HEIGHT

See 'q'O ADJUST CU-I-FING HEIGHT" in

the Operation sectionof this manual.

-<4 Mowing __<_

I 2oX. position / /

I t l

I / /

i 1 l

U4 oket f U4

LOW POSITION HIGHPOSITION

REAR DEFLECTOR

The rear deflector, attached between the

rear wheels of your mower, is provided to

minimize the possibilitythat objects wilt

be thrown out of the rear of the mower

into the operator mowing position, if the

deflectorbecomes damaged, it should be

replaced.

TO ADJUST HANDLE

The handle can be mounted in a high or

low position. The mounting holes in the

bottom of lowerhandle are off center for

raising or lowering the handle.

1. Remove upper handle and all wire

tie(s) securing cable(s) to lower handle.

2. Remove hairpin cotters from lower

handle bracket mounting pin.

3. Squeeze lower handle in to remove it

from mounting pins.

4. Turn lower handle over to raise or

lower handle.

5. Squeeze lower handle in and position

holes onto mounting pins on handle

bracket.

6. Reassemble upper handle and all

parts removed from lower handle.

SQUEEZE

TO ADJUST

_owerhandle--"-- I

Mountingpin-----_l

Handle / _ U_I

bracket Hairpin otte, I Jl! l

\

\

Lower

ROTATE

ENGINE

ENGINE SPEED

Your engine speed has been factory set.

Do not attemptto increase engine speed

or it may resultin personal injury. If you

believe that engine is runningtoo fast or

too slow, take your mower to a qualified

service center for repairand adjustment.

CARBURETOR

Your carburetor is not adjustable. If your

engine does not operate propedy due to

suspected carburetorproblems, take your

lawn mower to a qualified service center

for repair and/or adjustment.

iMPORTANT: Never tamper with the

engine governor, which is factory set for

proper engine speed. Overspeeding

the engine above the factory high speed

setting can be dangerous. If you think

the engine-governed high speed needs

adjusting, contact a qualified service

center, which has proper equipment and

experience to make any necessary adjust-

ments.

13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 35 36

Comments to this Manuals

No comments