Ariens 985115 User Manual download pdf (Page 20)

GB - 20

TROUBLESHOOTING

PROBLEM PROBABLE CAUSE CORRECTION

Starter will not

operate when

ignition key is

turned to “S”

position.

1. Fwd-Rev lever in “FORWARD”

position.

2. PTO engaged.

3. Loose battery cable(s).

4. Blown fuse.

5. Discharged battery.

6. Defective solenoid switch.

7. Defective starter.

1. Place Fwd-Rev lever in neutral position.

2. Disengage PTO.

3. Clean and tighten battery connections.

4. Replace fuse.

5. Charge battery.

6. Replace. Call your dealer.

7. Replace starter. Call your dealer.

Solenoid

switch clicks

but starter will

not operate

when ignition

is turned to

“S” position.

1. Discharged battery.

2. Loose battery cable.

3. Defective starter.

1. Charge the battery. See Maintenance.

2. Clean and tighten battery connections.

3. Replace starter. Call your dealer.

Engine starter

operates but

engine will not

start when

ignition switch

is turned to

“S” position.

1. Fuel tank empty.

2. Fuel shut-off valve at the fuel tank

turned off.

3. Relay defective.

4. Engine failure.

1. Fill tank with clean, fresh fuel.

2. Turn fuel shut-off valve on.

3. Replace relay. Call your dealer.

4. See Engine Manual.

Engine starts

but runs

roughly.

1. Engine choke in “ON” position.

2. Restricted air cleaner element.

3. Restricted fuel cap vent.

4. Engine carburetor malfunction.

5. Engine electrical system trouble.

1. Move engine choke to "OFF".

2. Clean air cleaner. See engine manual.

3. Clear obstruction from fuel cap vent.

4. See Engine Manual.

5. See Engine Manual.

Engine stops

when PTO or

Fwd-Rev is

engaged.

1. Operator presence handle not

pressed.

2. Operator presence handle out of

adjustment.

3. Faulty switch.

1. Press and hold at least one operator

presence control.

2. Call your dealer.

3. Replace switch. Call your dealer.

The tractor will

not move

when the

direction

control lever is

moved to

"FORWARD"

or

"REVERSE."

1. Gear shift lever in “NEUTRAL”

position.

2. Range shift handle in "NEUTRAL”

position.

3. Fwd-Rev clutch needs adjustment.

4. Internal transmission damage.

1. Place gear shift lever in Hi or Low position.

2. Place range shift lever in Hi or Low position.

3. Adjust Fwd-Rev clutch. See Adjustments or

call your dealer.

4. Call your dealer.

1 2 ... 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments