Ariens 920402 - Sno-Tek 24E Operator's Manual download pdf (Page 14)

EN – 13

13. Reinstall belt cover and tighten hardware.

14. Reinstall chute rotation rod into chute rotation gear

and secure with spring clip.

15. Reinstall chute deflector cable snap into deflector

anchor and deflector cable eyelet onto deflector arm.

Secure with sleeve bushing and hairpin. See Figure 6.

16. Adjust skid shoes. Refer to Operator’s Manual for

adjustment procedure.

17. Adjust attachment clutch / brake. Refer to Operator’s

Manual for adjustment procedure.

18. Reconnect spark plug wire.

IMPORTANT: Check all adjustments after first use.

TRACTION DRIVE BELT

REPLACEMENT

Remove Traction Drive Belt

NOTICE: Save all hardware for reinstallation.

1. Stop engine, remove key and wait for all moving parts

to stop and for hot parts to cool.

2. Disconnect spark plug wire from engine.

3. Separate auger housing from frame. See Separate

Auger Housing from Frame on page 10.

See Figure 14.

4. Disconnect idler spring from traction drive idler.

5. Disconnect swing gate return spring from frame.

6. Remove hardware securing swing gate spacer to

frame and remove swing gate spacer.

7. Slide swing gate left so swing gate tab is out of stop

hole in frame.

8. Move swing gate forward to access traction drive belt

and remove belt.

NOTICE: It may be necessary to slowly pull recoil starter

handle to turn traction sheave to remove belt.

WARNING: AVOID INJURY. Auger / impeller

must stop within 5 seconds when attachment

clutch lever is released.

Figure 13

1. Attachment Sheave

2. Belt Finger

3. Attachment Drive Belt

4. Hex Bolt

5. Locking Washer

6. Flat Steel Washer

Figure 14

1. Tapping Screw

2. Swing Gate Spacer

3. Swing Gate Return Spring

4. Swing Gate

5. Swing Gate Tab & Stop Hole

6. Traction Drive Idler

7. Traction Sheave

8. Idler Spring

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 31 32

Comments to this Manuals

No comments

Ariens 920402 - Sno-Tek 24E Operator's Manual Page 14

Comments to this Manuals

Related products and manuals for Snow throwers Ariens 920402 - Sno-Tek 24E