Ariens 991039 - Zoom 2452 HD Specifications download pdf (Page 23)

Aligning the Steering Levers

(Figure 14)

1. Shut OFF engine. Engage parking

brake. Remove the ignition key.

2. Place seat in the service position (See

Service Position on page 17).

3. Loosen brake interlock on the same side

as steering lever to be adjusted.

4. Loosen tie rod jam nuts and turn tie rod

until steering levers are aligned.

5. Tighten jam nut on tie rod, tighten brake

interlock.

1. Tie-Rod Jam 4. Brake

Nut Interlock

2. Tie-Rod 5. Hydrostatic

3. Steering Transmission

Lever

Figure 14 OF3381

ADJUSTING THE UNIT TO TRACK

STRAIGHT

_1 ARNING: Prior to adjusting the

tracking of the unit, shut OFF

engine, engage parking brake,

and remove the ignition key.

Check and adjust tire pressure. Increase

pressure on side unit tracks to. DO NOT

exceed maximum recommended tire

pressure (See Specifications on page 30).

If tire pressure adjustment does not solve

tracking problem, adjust the limiter bolts on

the stop bracket (Figure 15). Front bolts

adjust forward and rear bolts adjust reverse.

Lengthen the limiter bolt (move closer to

lever) on side which is too fast.

1. Limiter Bolt 4. Stop

2. Jam Nut Bracket

3. Steering

Lever

Figure 15

GB - 23

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 70 71

No comments

Ariens 991039 - Zoom 2452 HD Specifications Page 23