Ariens 915145-Zoom XL 42 Specifications download pdf (Page 27)

PTO or mower

blades do not

engage or shuts

off.

Engine

overheats.

Unit moves with

engine off and

parking brake

engaged.

Hour meter

continues when

engine not

running.

Unit does not

travel in a

straight line.

Unit creeps with

steering levers

in neutral

position.

1. Operator presence

switch not

depressed.

2. Faulty operator

presence switch.

3. Electric clutch

connector is loose

or disconnected.

4. Faulty PTO belt.

5. Faulty PTO switch,

wires, connectors,

or clutch.

1. Engine oil level

low.

2. Cooling system

plugged.

3. Faulty engine.

1. The parking brake

needs adjustment.

2. Faulty parking

brake.

1. Ignition key is in

the run position

with engine turned

off.

1. Incorrect tire

pressure.

2. Steering levers

need adjustment.

3. Hydrostatic

transmission

and/or linkage

needs adjustment.

1. Hydrostatic

transmission

and/or linkage

needs adjustment.

1. Depress operator presence switch

by sitting on seat.

2. Contact yourAriens Dealer.

3.

4.

5.

Connect the electric clutch

connector. See REPLACING

HYDROSTATIC BELT on page 24

for the electric clutch connector

location.

Replace PTO belt (see REPLACING

PTO BELT on page 23).

Contact your Ariens Dealer.

1. Add engine oil. Refer to Engine

Manual for detailed instructions.

2. Clean cooling system. Refer to

Engine Manual for detailed

instructions.

3. Contact yourAriens Dealer.

1. Contact yourAriens Dealer.

2. Contact yourAriens Dealer.

1. Turn ignition key to the off position.

1.

2.

Check tire pressure (see

SPECIFICATIONS on page 29)

Adjust steering levers (see Forward

and Reverse Speed Adjustment on

page 23)

3. Contact yourAriens Dealer.

1. Contact yourAriens Dealer.

GB - 27

1 2 ... 22 23 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments