Ariens 915145-Zoom XL 42 Specifications download pdf (Page 19)

LEVELLING AND ADJUSTING

PITCH OF MOWER DECK

NOTE: Adjust on a level surface, with the

tires inflated to the correct air pressure (see

SPECIFICATIONS on page 29).

There are three measurements required to

level and adjust the pitch of the mower deck.

1. The distance from the mower blades to

the ground.

2. The forward pitch of the mower blades.

3. The pitch of the mower blades from

side-to-side.

The Distance From The Mower

Blades To The Ground (Figure 13):

In the lowest cutting position should be

1-1/2 in. + 1/4 in. (3.8 cm + 0.64 cm).

In the highest cutting position should be

4-1/2 in. + 1/4 in. (11.4 cm + 0.64 cm).

Lowest Cutting Position

3 1

2

1-1/2 in. + 1/4 in. (3.8 cm + 0.64 cm)

Highest Cutting Position

1 2

3

4-1/2 in. + 1/4 in. (11.4 cm + 0.64 cm)

1. Mower Deck

2. Mower Blade

3. Ground

Figure 13

The Forward Pitch Of The Mower

Blades (Figure 14):

Should be 0.0 in. (0.0 mm) to 1/4 in.

(6.35 mm) pitched forward.

NOTE: This measurement must be taken

when the mower blades ends are facing

forward.

Forward Pitch of Mower Blades

3 1 2

Forward Pitch = 0.0 in. (0.0 mm) to

1/4 in. (6.35 mm)

1. Mower Deck

2. Mower Blade

3. Ground

Figure 14

The Pitch Of The Mower Blades From

Side-To-Side (Figure 15):

Should be within 1/4 in. (6.35 mm) as

measured on each side of the mower

deck.

NOTE: This measurement must be taken

when the mower blade ends are

perpendicular (at a right angle) to the frame

of the unit.

Side-To-Side Pitch

1/4-in. (6.35 cm)from Side-To-Side

1. Mower Deck

2. Mower Blade

3. Ground

Figure 15

GB - 19

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

Comments to this Manuals

No comments