Ariens 911403-WAW 1034 Specifications download pdf (Page 20)

Deck Belt

1. Stop engine, remove key, wait for all

moving parts to stop and hot parts to

cool.

2. Remove the two drive belts from engine

pulley. See Wheel Drive Belts on

page 18.

3. Remove the pto belt from the pto clutch.

See PTO Belt on page 19.

4. Remove the two idler arms from the

deck.

5. Remove the deck belt and install the

new belt.

6. Replace the two idler arms on the deck.

7. Replace the pto belt on the pto clutch.

REPLACING MOWER BLADE

Remove (Figure 15)

CAUTION: Mower blades are

sharp and can cut you. Wrap the

blades or wear gloves, and use

extra caution when servicing

them.

1. Block mower blades to prevent rotation.

2. Remove mounting hardware and mower

blades from mower deck.

Install (Figure 15)

1. Install mower blades on mower deck

with mounting hardware.

2. Torque 5/8-inch hex bolt to 80 -

100 Ibf-ft (108.4 - 135.6 N°m).

1. Flat Washer

2. Bevel

Washer

3. 5/8-inch

Hex Bolt

4. Mower

Blade

Figure 15

SERVICING THE BATTERY

NOTE: Unit comes equipped with a

maintenance-free battery that requires no

regular maintenance except cleaning the

terminals.

,&

WARNING: Battery posts,

terminals and related accessories

contain lead and lead

compounds, chemicals known to

the State of California to cause

cancer and reproductive harm.

Wash hands after handling.

Battery Removal and Installation

Remove (Figure 16)

1. Remove the battery cover.

2. Disconnect negative (-) cable first, then

positive (+) cable.

3. Remove battery from unit.

Install (Figure 16)

1. Install battery on the unit.

2. Connect positive (+) cable first, then

negative (-) cable.

3. Apply petroleum jelly or dielectric grease

to battery cable ends and terminals.

4. Replace the battery cover.

GB - 20

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 56 57

Comments to this Manuals

No comments