Ariens 911403-WAW 1034 Specifications download pdf (Page 18)

Forward/Reverse Drive Controls BELT REPLACEMENT

WARNING: If you cannot adjust

the controls so the unit drives

properly, immediately take the unit

to your local authorized dealer for

repairs.

After new belts have been worn in or if the

drive seems to be losing power, the drive

control cable may need adjustment.

Adjust both drive controls the same way.

1. Loosen the lock nut on the drive lever.

2. Turn the cable adjuster to tighten or

loosen the cable.

3. Tighten the lock nut to hold the

adjustment.

4. Test the drive.

Unit should move forward when the

drive control is squeezed and it should

coast to a stop when the drive control is

released.

NOTE: The reverse drive control has been

removed from the unit for clarity of the

illustration.

1. Cable 2. Lock Nut

Adjuster

Figure 11

WARNING: AVOID INJURY.

ALWAYS block wheels, engage

parking brake and know all jack

stands are strong, secure and will

hold weight of unit during

maintenance.

Wheel Drive Belts

1. Stop engine, remove key, wait for all

moving parts to stop and hot parts to

cool.

2. Raise and support the rear of the unit.

3. Remove the rear cover and disconnect

the neutral return springs from the spring

anchors.

Disconnect neutral return

springs from the spring anchors.

Figure 12

4. Remove the idler arm from the

transmission plate. See Figure 13.

5. Remove the forward drive belt from the

engine pulley and remove it from the

unit.

6. Remove the reverse drive belt from the

engine pulley and remove it from the

unit.

7. Route the new reverse belt through the

transmission idler arm and then install

belt on the engine pulley. See Figure 13.

8. Route the new forward belt through the

transmission idler arm and then install

belt on the engine pulley. See Figure 13.

9. Install the idler arms on the transmission

plate and install the belts on the

transmission pulleys. See Figure 13.

10. Replace the rear cover.

11. Start the unit and test operation of the

drive system. Adjust the wheel drive

controls, if needed.

GB- 18

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 56 57

Comments to this Manuals

No comments