Ariens 935000 User Manual download pdf (Page 6)

7. BE CAREFUL: REMOVE IGNITION KEY BEFORE

DISMOUNTING FROM TRACTOR. THIS WILL

PREVENT CHILDREN AND INEXPERIENCED

OPERATORS FROM STARTING THE TRACTOR.

FIGURE 3

(YT11 Illustrated)

OPERATING THE TRACTOR

1. Start the engine using the procedure explained

under "Pre-starting Inspection" and "Starting the

Engine".

NOTE: THE SPEED SELECTOR LEVER MUST BE IN THE

NEUTRAL POSITION, THE IMPLEMENT POWER

CLUTCH LEVER DISENGAGED AND THE OPERATOR

ON SEAT TO START THE ENGINE.

2. Release Parking Brake Lock 0 by depressing the

Brake ©or Clutch Pedal ® (Figure 1) until the lock

disengages.

3. Depress Clutch Pedal, place Speed Selector

Lever 0 and High-Low Range Selector ©

(Figure 1) into the desired gear and slowly release

the pedal to provide smooth acceleration.

4. Select the desired throttle speed with the

Throttle-Choke Control Lever. When operating a

power-driven attachment, operate the engine at

full throttle, (3250 RPM) unless otherwise

specified and control travel speed by selecting an

appropriate gear.

5. To raise or lower the attachment use the Attach

ment Lift Lever ®.

6. To start the attachment, engage the Implement

Power Clutch ® slowly with the engine running at

Va throttle, then increase speed to full throttle.

7. To stop the tractor, fully depress Clutch and Brake

Pedals and place Speed Selector Lever in'*

"NEUTRAL". Fully depress Brake Pedal and

engage the Parking Brake Lock when parking.^«:

leaving the tractor. (Figures 1, 2 & 3).

EMERGENCY STOPPING

Always use caution when mowing-be alert for

children, pets or obstacles in path. If necessary to make

emergency stop, step firmly on Brake Pedal and Clutch

Pedal.

IMPORTANT: DO NOT FORCE SPEED SELECTOR

LEVER IF GEAR DOES NOT ENGAGE. APPLY SLIGHT

PRESSURE ON THE SPEED SELECTOR LEVER WHILE

RELEASING THE CLUTCH PEDAL. THE CLUTCH

PEDAL MUST BE DEPRESSED TO ENGAGE ANY

SELECTED GEAR. DEPRESSING THE PEDAL TOO LIT

TLE WILL CAUSE GEAR CLASH AND POSSIBLE

DAMAGE TO THE TRANSMISSION. HOLD LEVER

TOWARD ENGAGED POSITION WHILE DECLUT

CHING.

WARNING:

1. BEFORE SERVICING ANY ATTACHMENT:

a. DISENGAGE POWER.

b. SHUT OFF ENGINE. ^

c. make' sure attachment has STOPPED

REVOLVING.

d DISCONNECT ENGINE SPARK PLUG CABLE

TO PREVENT ACCIDENTAL RESTART. .

2. KEEP CHILDREN, BYSTANDERS, AND PETS OUT

OF THE WORKING AREA.

3. KEEP HANDS, FEET AND CLOTHING AWAY

FROM POWER DRIVEN PARTS.

4. KEEP ALL SHIELDS AND GUARDS IN PLACE.

GRASS BAGGING

Ariens recommends grass cutting with grass bagger

without vanes before installing vanes for increased per

formance. If performance is satisfactory without vanes

(available for mowers of 32" cutting width or less), do

not use vanes. The vanes use more power and generate

more noise. Use vanes only if satisfactory performance

cannot be obtained without them. Generally, broadleaf

grasses can be cut and bagged without vanes. The

finer grasses may require the use of vanes. In extremely

wet conditions, vanes may also be of help.

-6-

1 2 3 4 5 6 7 8 9 10 11 ... 39 40

Comments to this Manuals

No comments

Ariens 935000 User Manual Page 6

Comments to this Manuals

Related products and manuals for Gardening equipment Ariens 935000