Ariens SNO-THRO 008-SS322E User Manual download pdf (Page 17)

1. Switch Box

2. Starter Button

3. Female End of Power Cord

Figure 11

Controls and Features

Electric Starter

Optional on models 938006, 007, 301,303 (Figure 11).

IMPORTANT: Electric starter is not equipped with a

thermal cutout switch. DO NOT crank engine for more

than 20 seconds. Always allow electric starter to cool

down for 10 minutes or electric starter damage will

result.

1. Follow Starting and Shut Off steps 1 -5.

2. Connect female end of power cord to Switch Box.

3. Plug male end of power cord into 120 volt AC

receptacle.

4. Push Starter Button to crank engine.

5. When engine starts, release Starter Button and

, disconnect Power Cord from receptacle first, then

from Switch Box.

6. Gradually push in choke control knob to housing.

Throwing Snow

Lift the Handlebar only high enough to propel unit

forward. Do not lift so high to allow snow to kick back

from under unit.

To clear an area, run unit in an overlapping

series of paths. For large areas start in

middle and throw snow to each side so you

do not have to move snow more than once.

ALWAYS direct snow away from area to be

cleared and with direction of wind.

Ariens* Sno-Thro* Orig. 4/96

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

No comments

Ariens SNO-THRO 008-SS322E User Manual Page 17