Ariens 932 Series User Manual download pdf (Page 3)

Introduction

I

I

How To Use Your Service Manual

The Ariens Service manual is arranged for

quick, easy reference and is divided into

numerical sections. Each section is then divid

ed into sub-sections. To use this manual pro

ceed as follows:

Refer to the index to determine section within

Which desired information will be contained

and proceed to front of that section for its

Table of Contents.

Locate subject desired. Page number is listed

across from subject and consists of section

number and page number.

NOTE: Read all information for servicing a part

or system before repair work is started to avoid

needless disassembly.

Preparation For Service

Proper preparation is very important for effi

cient service work. A clean work area at the

start of each job will allow you to perform the

repair as easily and quickly as possible, and

reduce incidences of misplaced tools and

parts. A sno-thro that is excessively dirty

should be cleaned before work starts. Cleaning

will occasionally uncover trouble sources.

Tools, instruments and parts needed for the

job should be gathered before work is started.

Interrupting a job to locate tools or parts is a

needless delay.

Service Buiietins

In addition to the information contained in this

Ariens Service Manual, Ariens Service

Bulletins are issued to Ariens Dealers from

time to time, which cover interim engineering

changes and supplementary information. Ser

vice Bulletins should be consulted to complete

information on models covered by this manual.

Replacement Parts

When replacement parts are required, use only

genuine Ariens parts. Failure to do so may

result in product malfunction and possible in

jury to operator and/or bystander.

NOTE: All references to “Left”, “Right”,

“Front” and “Back” are given from operators

position.

NOTE: The descriptions and specifications

contained in this manual were in effect at the

time the manual was approved for printing.

Ariens company reserves the right to discon

tinue models without notice and without incur

ring obligation. The equipment identified as

either standard or optional and the various il

lustrations may not all be applicable to your

unit. If you have questions, always check with

your Ariens dealer.

»

©Ariens 1987

RM-932

Part No. 000128A

Printed in U.S.A. 11-87

1 2 3 4 5 6 7 8 ... 22 23

Comments to this Manuals

No comments