Ariens 932007 User Manual

Owner’s Manual932000 Series Compact Sno-ThrosModel 932001 (ST270) 2.7 HPSerial no. 042101 and upModel 932004 (ST350) 3.5 HPSerial no. 030101 and upMod

LUBRICATIONENGINEFill Crankcase with oil as recommended in Engine Manufacturer’s Instructions supplied with the product. Check oil level

SNO-THRO SERVICE GUIDEPROBLEM POSSIBLE CAUSE CORRECTIONDifficult starting, engine runs poorly.1.Defective spark plug.1.Replace spark plug, check conne

BASIC CONSUMER-USER SERVICE COMPONENTSNOTE: FOR ENGINE LUBRICATION AND PARTS SUCH AS AIR CLEANER AND SPARK PLUGS REFER TO ENGINE ENSTRU

ASSEMBLY & PRE-SERVICEWARNING: FAILURE TO FOLLOW ALL INSTRUCTIONS FOR ASSEMBLY AND PRE-SERVICE COULD RESULT IN PERSONAL INJURY AND/OR

ASSEMBLY & PRE-SERVICEa. Remove belt cover located in front of engine.b. Check alignment of blower engine sheave and blower sheave with

ASSEMBLY & PRE-SERVICEATTACHMENT CLUTCH - CONTINUEDafter attachment clutch handle is disengaged (up position). If this is not achieve

ASSEMBLY & PRE-SERVICETIRE PRESSUREModels 932004 and 932006 are equipped with pneumatic tires. Adjust pressure to 12 to 20 PSI befo

INSTRUCTIONS FOR SAFE OPERATIONTRAINING1. Read the Owner's Manual carefully. Be thoroughly familiar with the controls and the proper

CONTENTSInstructions for Safe Operation...

OPERATIONFIGURE 1Discharge Right LeftSpeed Selector 4 3 2 1(932006)Speed Selector 3 2 1 R(932001, 932004) 0©Engine PrimerPush to prime-4-

OPEjmmBEFORE STARTING — FIGURE 1MPORTANT; REVIEW THE CONTROL AND COMPONENT LOCATIONS AND DECALS ON YOUR SNO-THRO AND SHOWN IN FIGURE 1

ADJUSTMENTS/ MAINTENANCEAriens Company recommends that you have adjustments made by your local Aliens dealer. He has the tools and kn

ADJUSTMENTS/ MAINTENANCECHUTE CRANK ADJUSTMENT ~ FIGURE 6In the event the chute crank fails to rotate smoothly, loosen the nut securing t

ADJUSTMENTS/ MAINTENANCEREPLACEMENT OF FRICTION WHEEL — CONTINUED8. Replace the bearing flange on the right side of the frame and secure

ADJUSTMENTS/ MAINTENANCEREPLACEMENT OF THE BLOWER DRIVE BELT — FIGURES 8 & 9REPLACEMENT OF BLOWER HOUSING t- FIGURES 8 & 9CAUTION: SINC