Ariens 932 Series User Manual download pdf (Page 13)

^ 2.4 Wheel Drive Clutch

Handlebars and Clutch Controls

On models with traction rod and rod adapter,

remove push nut, tapping screws and pin

hoiding handle pivot and wheei drive clutch

handle to handlebar. Remove handle pivot and

wheel drive clutch handle.

Remove set screw in rod adapter and remove

traction clutch rod.

On models with adjustment strap, remove

push nut and pin holding clutch lever to

handlebar and remove cable from clutch lever.

Remove hook rod from traction clutch arm and

adjustment strap.

Check parts for wear or replacement.

For assembly and adjustment procedure see

Wheel Drive Clutch Adjustment Section.

2.5 Wheel Drive Clutch Adjustment

Adjust wheel drive clutch to compensate for

wear of friction wheel when slippage occurs.

On models with rod adapter, adjust by loosen

ing set screw in rod adapter, pushing clutch

handle down on handle grip, and shifting

speed selector to third gear. Raise rod adapter

so top of bracket clears top of slot in frame by

1/16” to 1/8” and tighten set screw.

Check for proper adjustment by measuring

distance between roll pin and bracket on trac

tion rod. Distance must be 1/8 - 3/16” with

clutch engaged.

1.

2.

Roll Pin

Bracket

Figure 2-5: Wheel Drive Ciutch Adjustment

(inside Frame)

1. Traction Clutch Rod 1. Hook Rod

2. Rod Adapter 2. Bracket

3. Bracket

Figure 2-6: Wheel Drive Ciutch Adjustment

2-7

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 22 23

Comments to this Manuals

No comments