Ariens 932 Series Service Manual download pdf (Page 33)

13 - 33

Problem Probable Cause Correction

Engine will not crank/start.

1. Fuel tank is empty.

2. Fuel shut-off valve closed.

3. Build up of dirt and residue around

governor/carburetor.

4. Key switch not in run position.

5. Ignition switch starter circuit not

functioning.

1. Fill fuel tank.

2. Open fuel shut-off valve.

3. Clean an area around governor/

carburetor.

4. Put key switch into run position.

5. Check for a bad starter or

connections

Engine stops.

1. Out of fuel.

2. Fuel shut-off valve closed.

3. Mechanical jam in blower rake or

impeller.

4. Polluted fuel supply

5. Faulty spark plug.

1. Fill fuel tank.

2. Open fuel shut-off valve.

3. Turn off engine, remove key, and

wait for all moving parts to stop.

Check for and remove obstruction

and repair before restart.

4. Replace with clean fuel.

5. Replace or clean spark plug.

Engine Problems.

1. See Engine Manual.

Does not operate in

Forward/Reverse.

1. Friction disc not adjusted properly.

2. Traction belt not functioning.

3. Speed selector not adjusted

properly.

1. Repair or replace fiction disc. See

Service and Adjustments.

2. Repair or replace traction drive belt.

See Service and Adjustments.

3. Adjust speed selector. See Service

and Adjustments.

Small rubber beads collect

in frame.

1. Friction disc wear. 1. Normal friction disc wear. Chunks or

large pieces of rubber mean friction

disc should be checked and

replaced as necessary.

Unit throws snow poorly

or does not throw snow.

1. Shear bolts broken.

2. Attachment clutch/brake not

adjusted properly.

3. Attachment drive belt worn or

damaged.

1. Replace shear bolts (see Shear

Bolts).

2. Adjust attachment clutch/brake (see

Attachment Clutch/Brake

Adjustment).

3. Replace attachment drive belt (see

Attachment Clutch/Brake

Adjustment).

SECTION 13 - TROUBLESHOOTING

1 2 ... 28 29 30 31 32 33 34

Comments to this Manuals

No comments