Ariens 921017 - Deluxe 24 Platinum Specifications download pdf (Page 27)

EN - 27

SHEAR BOLTS

(Figure 27)

IMPORTANT: Use only Ariens OEM shear

bolts for replacement. Use of any other type

of shear bolt may result in severe damage to

unit. See SERVICE PARTS on page 35.

Occasionally a foreign object may enter the

auger/impeller housing and jam the auger,

breaking shear bolts which secure the auger

to the shaft. This allows auger to turn freely

on the shaft which may help prevent damage

to gear case.

For Replacement:

1. Align shear bolt holes in auger with

shear bolt holes in the shaft.

2. Drive shear bolt through hole (if shear

bolt was broken this will drive remaining

part from shaft).

3. Secure shear bolt with nut.

NOTE: DO NOT overtighten the shear bolt.

Tighten shear bolt to 5.8 – 12.2 lbf-ft

(7.9 – 16.5 N•m).

REMOTE WHEEL LOCK

ADJUSTMENT

(921013, 022, 027)

(Figure 28)

If remote wheel lock does not lock or unlock:

1. Place unit in service position. See

Service Position on page 23.

2. Loosen jam nuts on cable. Make sure

the bottom jam nut is loosened enough

to remove slack from cable (Figure 28).

3. Pull the cable adjuster to remove slack

between the cable adjuster and the

extension spring and hold the cable

adjuster in position while finger

tightening the top jam nut against the

bracket. Do not extend the spring or

engage the mechanism.

4. Tighten the bottom jam nut.

5. Check function of remote wheel lock. If

wheel lock does not function properly,

remove bottom cover to check cable

slack.

6. Repeat steps 2 – 4 while watching cable

to remove slack.

7. Check function of remote wheel lock. If

wheel lock does not function properly,

take the unit to Dealer for repairs.

REMOTE DEFLECTOR

CONTROL ADJUSTMENT

(Figure 29)

Deflector must stay in selected position while

throwing snow.

If deflector does not stay in set position:

1. Tighten nut beneath control panel to

increase pressure on deflector control

(Figure 29).

Figure 26

2

1

OS0482

1. Skid Shoe

2. Skid Shoe Hardware

Figure 27

1. Auger

2. Shear Bolts

OS7150

1

2

Figure 28

1. Top Jam Nut

2. Bottom Jam Nut

3. Cable Adjuster

1

2

No

Slack

OS7170

3

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 43 44

Comments to this Manuals

No comments