Ariens HVZ 915085-2350 Service Manual download pdf (Page 28)

8 - 27

8.1 LIFT SYSTEM

The mower pan lift system is a manual lift system

controlled by the operator.

Mower Lift Pedal

Raises and lowers mower deck, Figure 21.

Figure 21

NOTE: The adjustment pin (3) is used to set the height

of the mower deck. See Specifications for cutting

height dimensions.

Figure 22

Press mower lift pedal (1) and install adjustment pin (3)

in the desired adjustment hole (2).

8.2 LIFT SYSTEM REMOVAL

See Figure 23

Remove the mower deck from the unit before removing

the lift system.

The lift system is held in place with retaining rings and

a nyloc nut.

To remove the lift system components:

1. Remove the pins (2) that hold the lift rod (1) to the

lift arms (4).

2. Remove the bolts at the ends of the lift shafts (5).

The lift shafts and arms can be removed.

Inspect all the bushings for wear and replace as

needed.

Lubricate all pivot points with a high quality grease and

reassemble.

Figure 23

SECTION 8 - LIFT SYSTEM

OE0013

1. Mower Lift Pedal 2. Adjustment Hole

3. Adjustment Pin

OE0090

1. Lift Rod

2. Pin

3. Bolt

4. Lift Arm

5. Lift Shaft

PE1230

DSCN1290.jpg

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 52 53

No comments

Ariens HVZ 915085-2350 Service Manual Page 28