Ariens 991082 ZT HD48 Specifications download pdf (Page 9)

GB - 9

EMISSION CONTROL SYSTEM

This equipment and/or its engine may include

exhaust and evaporative emissions control

system components required to meet U.S.

Environmental Protection Agency (EPA)

and/or California Air Resources Board

(CARB) regulations. Tampering with

emission controls and components by

unauthorized personnel may result in severe

fines or penalties. Emission controls and

components can only be adjusted by an

Ariens Company dealer or an authorized

engine manufacturer's service center.

Contact your Ariens Company Equipment

Retailer concerning emission controls and

component questions.

SAFETY RULES

Read, understand, and follow all safety

practices in Owner/Operator Manual before

beginning assembly. Failure to follow

instructions could result in personal injury

and/or damage to unit.

ALWAYS remove key and/or wire from spark

plug before assembly. Unintentional engine

start up can cause death or serious injury.

Complete a walk around inspection of unit

and work area to understand:

• Work area • Your unit • All safety decals

Determine which attachments are needed

and can be used safely.

Inspect unit before each use for: missing or

damaged decals and shields, correctly

operating safety interlock system, and

deterioration of grass catchers. Replace or

repair as needed.

ALWAYS check overhead and side

clearances carefully before operation.

ALWAYS be aware of traffic when operating

along streets or curbs.

Keep children and people away.

Keep children out of work area and under

watchful care of a responsible adult.

Keep area of operation clear of all toys, pets,

and debris. Thrown objects can cause injury.

Check for weak spots on docks, ramps or

floors. Avoid uneven work areas and rough

terrain. Stay alert for hidden hazards or traffic.

DO NOT operate near drop-offs, ditches, or

embankments. Unit can suddenly turn over if

a wheel is over the edge of a cliff or ditch, or if

an edge caves in.

Data indicates that operators, age 60 and

above, are involved in a larger percentage of

riding mower related injuries. These

operators should evaluate their ability to

operate the riding mower safely enough to

protect themselves and others from serious

injury.

Read the entire Owner/Operator manual and

other training material. If the operator or the

mechanic cannot read the manual, it is the

owner’s responsibility to explain it to them.

Only the user can prevent and is responsible

for accidents or injuries occurring to

themselves, other people or property.

Only trained adults may operate or service

unit. Training includes actual operation.

Local regulations may restrict the age of the

operator.

NEVER allow children to operate or play on

or near unit. Be alert and shut off unit if

children enter area.

NEVER operate unit after or during the use of

medication, drugs or alcohol. Safe operation

requires your complete and unimpaired

attention at all times.

DO NOT wear loose clothing or jewelry and

tie back hair that may get caught in rotating

parts.

Wear adequate outer garments.

NEVER wear open sandals or canvas shoes

during operation. Wear adequate safety gear,

protective gloves and footwear.

Wear proper footwear to improve footing on

slippery surfaces.

Always wear safety goggles or safety glasses

with side shields when operating mower.

10. CAUTION!

No smoking.

Fill fuel tank to bottom of

neck – MAXIMUM.

• Never fill fuel tank when engine is

running, hot or unit is indoors. Never

overfill fuel tank.

• Replace fuel cap securely and clean

up spilled fuel.

11. ROTATING PARTS!

AVOID INJURY. Stay

clear of rotating parts.

MAX. FILL

WARNING: Over Filling may cause

severe damage to evaporative

system!

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 39 40

Comments to this Manuals

No comments

Ariens 991082 ZT HD48 Specifications Page 9

Comments to this Manuals

Related products and manuals for Lawnmowers Ariens 991082 ZT HD48