Ariens 991065-Max Zoom 2552 Specifications Page 24

  • Download
  • Add to my manuals
  • Print
  • Page
    / 108
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 23
Aligning the Steering Levers
(Figure 14)
1. Shut OFF engine. Engage parking
brake. Remove the ignition key.
2. Place seat in the service position (See
Service Position on page 18).
3. Loosen brake interlock on the same side
as steering lever to be adjusted.
4. Loosen tie rod jam nuts and turn tie rod
until steering levers are aligned.
5. Tighten jam nut on tie rod, tighten brake
interlock.
1. Tie-Rod Jam 4. Brake
Nut Interlock
2. Tie-Rod 5. Hydrostatic
3. Steering Transmission
Lever
Figure 14 OF3381
ADJUSTING THE UNIT TO TRACK
STRAIGHT
WARNING: Prior to adjusting the
tracking of the unit, shut OFF
engine, engage parking brake,
and remove the ignition key.
Check and adjust tire pressure. Increase
pressure on side unit tracks to. DO NOT
exceed maximum recommended tire
pressure (See Specifications on page 31 ).
If tire pressure adjustment does not solve
tracking problem, adjust the limiter bolts on
the stop bracket (Figure 15). Front bolts
adjust forward and rear bolts adjust reverse.
Lengthen the limiter bolt (move closer to
lever) on side which is too fast.
1. Limiter Bolt
2. Jam Nut
3. Steering
Lever
Figure 15
4. Stop
Bracket
GB - 24
Page view 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 107 108

Comments to this Manuals

No comments