Ariens 988319 Specifications download pdf (Page 22)

GB-22

Deck Belt

NOTE: Mower drive belt must be removed before removing

the deck belt.

1. Stop engine, remove key and wait for all hot parts to

cool.

2. Remove the deck belt idler spring from the spring

anchor.

3. Remove deck belt from deck sheaves.

4. Install new deck belt.

5. Replace deck idler spring to tension belt.

6. Replace mower drive belt.

7. Replace deck cover.

MOWER BLADES

NOTE: If mower is used under sandy soil conditions, replace

blades when air lifts become eroded through at ends

(Figure 20).

Remove Mower Blades

1. Turn the engine off. Remove the ignition key. Remove

the ignition wire from the spark plugs.

2. Remove the bolts, lock washer, flat washers, and

blades from the spindle shafts.

Replace Mower Blades

1. Put the blades, flat washers, lock washers, and the

bolts back on the spindle shafts.

2. Tighten the bolts to a torque of 115-125 lbf-ft

(156-169.5 N•m).

3. Replace ignition wire on spark plugs.

Figure 19

OG1395

1. Mower Drive Belt

Idler Spring

2. Mower Drive Belt

Idler

3. Mower Drive Belt

4. Deck Belt

5. Deck Sheave

6. Mower Clutch

Sheave

7. Deck Belt Idler Spring

8. Deck Belt Idler

CAUTION: Use sturdy gloves or padding to

protect hands when working with mower

blades.

1. Cutting Edge

2. Air Lift Erosion

OT0792

Figure 20

DO NOT sharpen to this pattern

Sharpen to this pattern

DISCARD if more

than 1/2 in. (1.27 cm)

1 2 ... 17 18 19 20 21 22 23 24 25 26

Comments to this Manuals

No comments

Ariens 988319 Specifications Page 22

Comments to this Manuals

Related products and manuals for Lawnmowers Ariens 988319