Ariens 924 User Manual download pdf (Page 15)

Handelbars and Controls

2.8 Mechanical Interlock Adjustment

WARNING: With improper usage of unit,

failure of interlock if unnoticed, could

result in severe personal injury.

Setscrew

Traction Clutch Clevis

Slider

Check interlock by pressing down on clutch levers

(engaging both clutches). Remove hand from

attachment clutch lever, attachment clutch should

remain engaged until traction clutch lever is re

leased then both clutches must disengage.

2.9 Bellcrank and Slider

Remove nut and washer holding bellcrank to upper

handlebar panel.

Remove nut and washer holding slider to upper

handlebar panel and disconnect spring from upper

panel.

4. Roller

1. Attachment Clutch Rod 9.

Spacer Bushing

5. Attachment Clutch Clevis

2. Extension Spring

10.

Bellcrank

3. Hair Pin

11.

Lock Nut

Figure 2-7: Interlock

4. Setscrew

12.

Washer

5. Clevis Pin

13.

Bushing

6. Jam Nut 14.

Slider

With traction clutch lever "UP" (disengaged) loosen

clevis set screw on traction clutch rod, pull clevis

7. Clevis

8. Washer

15.

Extension Spring

down until slider is at end of slot and tighten set

screw.

Figure 2-8:

Bellcrank and Slider

Engage both clutch levers "DOWN", loosen clevis

set screw on attachment clutch rod and slide clevis

to clear roller on slider by 1/16 inch. Tighten set

screw with leg of clevis parallel to slider.

Remove slider assembly and check all parts for

replacement or repair.

NOTE: Be sure to check bushings and spacers for

wear.

Assemble, using reverse procedure.

2-7

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 71 72

Comments to this Manuals

No comments

Ariens 924 User Manual Page 15

Comments to this Manuals

Related products and manuals for Gardening equipment Ariens 924