Ariens Sno-Thro 926 Series Specifications download pdf (Page 20)

EN - 20

Drift Cutters

(Figure 13)

Drift cutters break up snow drifts that are

taller than the auger housing and direct the

snow into the auger. Store the drift cutters on

the auger housing when not in use. Install

them as shown below so they are taller than

the snow to be cleared.

Track Angle (926324)

(Figure 14)

The track angle can be adjusted to position

the auger housing for level clearing, deep

cutting or transport.

Squeeze the handlebar trigger and press

down on the handlebars to move the auger

housing into an up position. Release the

trigger to hold the position.

Lift up on the handlebars and squeeze and

release the handlebar trigger to move the

auger housing into a down position.

Figure 13

OS7110

Stored Position

Operating Position

Figure 14

Deep Cutting

OS7111

Transport

Normal

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 44 45

Comments to this Manuals

No comments