Ariens Power Brush 36 Specifications download pdf (Page 22)

GB - 22

Check Attachment Brake

(Figure 14)

1. With the attachment clutch lever

disengaged, brake pad must contact

attachment belt. With attachment clutch

lever engaged, brake pad must be more

than 1/16 in. (1.6 mm) from belt. If there

is more than 1/16 in. (1.6 mm) gap, go to

Check Belt Finger Clearance on

page 22. If there is less than 1/16 in.

(1.6 mm) gap, go to Step 2.

2. If there is less than 1/16 in. (1.6 mm)

gap between brake pad and belt, loosen

idler adjustment nut, and move idler

away from belt.

3. Position idler to achieve a 1/16 in.

(1.6 mm) minimum brake pad gap and a

1/2 – 7/8 in. (12.7 – 22.2 mm) gap

between the plastic roller and the frame.

IMPORTANT: If adjustments cannot be

brought into specified ranges see your Dealer

for repairs.

Check Belt Finger Clearance

1. With clutch lever engaged, the belt

finger located opposite the belt idler

must be less than 1/8 in. (3 mm) from

belts, but not touching the belts

(Figure 15).

2. Remove the belt cover.

3. To adjust belt finger, loosen the bolts and

move the finger to the proper position.

Tighten the bolts and recheck the belt

finger clearance.

4. Replace the belt cover.

Figure 13

Some components removed for

clarity of illustration.

Roller should be 1/2 – 7/8 in. (13 – 22 mm)

from the frame when the attachment clutch

is ENGAGED.

2

3

4

1

1. Frame

2. Idler Adjustment Nut

3. Attachment Idler Arm

4. Roller

Figure 14

OS7201

Minimum of 1/16 in. (1.6 mm).

1. Brake Shoe and Pad

2. Attachment Pulley

1

2

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 35 36

Comments to this Manuals

No comments