Ariens SNO-THRO 924333 - 1024 User Manual download pdf (Page 16)

GB - 16

GENERAL LUBRICATION

Sno-Thro should be lubricated (Figure 9) at beginning

of season or every 25 operating hours.

IMPORTANT: DO NOT allow grease or oil to get on

friction wheel, drive disc or belts.

IMPORTANT: Wipe each ﬁtting clean before and after

lubrication.

NOTE: Apply Stens Mix Hi-Temp Grease or equivalent

to the lubrication ﬁttings. See Service Parts.

Auger Shaft

NOTE: To grease auger shaft, remove shear bolt nuts,

and shear bolts. Turn auger on shaft while applying

grease at zerk ﬁttings. Replace shear bolt per instruc-

tions in Service and Adjustments.

CLEAN BATTERY (Model 333,334,502,503)

IMPORTANT: Battery is maintenance free. Do not

tamper with or attempt to open battery. See Service

and Adjustments for charging procedures.

Terminals

Keep battery and its terminals clean.

IMPORTANT: Remove battery from unit before

cleaning.

Remove corrosion from battery terminals and cable

connections with a wire brush, then wash with a weak

baking soda solution.

After cleaning, apply a thin coat of grease or petroleum

jelly to terminals and cable ends to retard corrosion.

CLEAN ENGINE

Refer to Engine Manual for detailed instructions.

1. Auger and Shaft

2. Discharge Chute

3. Sprocket/Pinion

Assembly

4. Axle Shaft

5. Shift Lever Arm

6. Pinion Chain

7. Hex Shaft

8. Shift Link

11 1

Figure 9

WARNING: AVOID INJURY. Read and

understand Battery Safety Rules in Safety

section before attempting any maintenance.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 24 25

Comments to this Manuals

No comments

Ariens SNO-THRO 924333 - 1024 User Manual Page 16

Comments to this Manuals

Related products and manuals for Cars Ariens SNO-THRO 924333 - 1024