Ariens 921020 User Manual download pdf (Page 3)

Page 3 of 5

Date: January 15, 2010 No. C-2007

Install New Attachment Drive Belts

1. Place new p/n 07200536 attachment belts onto attachment pulley.

NOTE: Holding down the attachment clutch lever will make it easier to reconnect the housing and frame.

2. Tip housing and frame back together and secure with cap screws.

3. Place belts onto engine sheave.

4. Reposition and secure belt finger.

IMPORTANT: With clutch lever engaged, belt finger on the side opposite the belt idler should be less than

1/8 in. (3 mm) from belt, but not touching the belt. Adjust belt finger as necessary.

5. Check attachment clutch adjustment.

Figure 2

1. Traction Drive Belt

2. Engine Sheave

3. Attachment Drive Belts

4. Belt Finger

5. Attachment Belt Idler

6. Attachment Idler Adjustment Nut

7. Traction Belt Idler

NOTE: Check

belt finger

clearance on

this side.

1 2 3 4 5

No comments

Ariens 921020 User Manual Page 3