Ariens 939 SNO-THRO 939001 User Manual download pdf (Page 32)

10 - 32

10.Before re-assembling gear case:

a. Clean mating surfaces of gear case.

b. Apply Loctite gasket to cleaned surface.

c. Allow to cure for 24 hours.

d. Make sure the flats on the bushings are in their

proper places.

11.Reassemble gear case.

After assembly is complete you should be able to

turn input shaft freely.

12.Fill gear case with lubricating oil (Ariens L-2, P/N

00008000):

a. Remove filler plug.

b. Fill gear case with oil.

c. With machine sitting level, check oil level.

Lubricating oil should be even with filler plug

hole.

NOTE: Inserting a wire into the hole may be necessary

to check level. Over-lubricating will not damage the

gear case.

Service Parts List

Order the following parts through your Dealer:

Part No. Description

00036800 Ariens Hi-Temp Grease (3, 3 oz.

cartridges)

21533400 Spark Plug (939001, 002)

21533500 Spark Plug (939300)

07200108 Impeller Belt

07200109 Stretch Fit Traction Belt

53200500 Shear Bolts

1 2 ... 27 28 29 30 31 32 33

No comments

Ariens 939 SNO-THRO 939001 User Manual Page 32