Ariens 991065-Max Zoom 2552 Specifications download pdf (Page 3)

GB - 3

DISCLAIMER

Ariens reserves the right to discontinue,

change, and improve its products at any time

without public notice or obligation to the

purchaser. The descriptions and

specifications contained in this manual were

in effect at printing. Equipment described

within this manual may be optional. Some

illustrations may not be applicable to your

unit.

DEALER DELIVERY

Dealer should:

1. Test brakes after unit is assembled to be

sure adjustment has not been disturbed

in shipment (See Parking Brake

Interlock System on page 11). Wheel

brakes are properly adjusted at factory.

2. Check the safety interlock system to

make sure that it is functioning properly.

With operator on seat, unit must not start

unless steering levers are in neutral (N)

and Power Takeoff (PTO) is disengaged

(Off). Engine must stop if operator

leaves seat when steering levers are in

any drive position or PTO is engaged

(On). See Safety Interlock System on

page 11.

3. Fill out Original Purchaser Registration

Card and return the card to Ariens.

4. Explain Limited Warranty Policy.

5. Explain recommended lubrication and

maintenance. Advise customer on

adjustments. Instruct customer on

controls and operation of unit. Discuss

and emphasize the Safety Precautions.

Give customer Owner/Operator, Parts,

and Engine Manuals. Advise customer

to thoroughly read and understand them.

Customer Note: Your Dealer has been

provided complete set-up and preparation

instructions which must be completed prior to

you taking delivery of this unit. The dealer is

required to review important information in

this manual with you before or upon delivery

of the unit or attachment.

SAFETY ALERT

SYMBOL

These are safety alert

symbols. They mean:

•ATTENTION!

•YOUR SAFETY IS

INVOLVED!

When you see this symbol:

•BECOME ALERT!

•OBEY THE MESSAGE!

SIGNAL WORDS

The safety alert symbols above and signal

words below are used on decals and in this

manual.

Read and understand all safety messages.

SAFETY

WARNING: This cutting machine

is capable of amputating hands

and feet and throwing objects.

Failure to observe the safety

instructions in the manuals and

on decals could result in serious

injury or death.

Slopes are a major factor related

to loss-of-control and tip-over

accidents. Operation on all slopes

requires extra caution.

Tragic accidents can occur if the

operator is not alert to the

presence of children. Never

assume that children will remain

where you last saw them.

Gasoline is extremely flammable

and the vapors are explosive,

handle with care.

Disengage attachment, stop unit

and engine, remove key, engage

parking brake, and allow moving

parts to stop before leaving

operator’s position.

DANGER: IMMINENTLY

HAZARDOUS SITUATION! If not

avoided, WILL RESULT in death

or serious injury.

OL1253

OL3900

1 2 3 4 5 6 7 8 ... 31 32

Comments to this Manuals

No comments