Ariens 920014 COMPACT 24 LE Specifications download pdf (Page 37)

EN - 37

TRACTION TENSION

ADJUSTMENT

(920020)

(Figures 45 and 46)

Check the track tension by applying pressure

on the track midway between the upper and

rear track rollers. Deflection should be

approximately 3/8" (9.5 mm) (Figure 45). If

deflection is excessive, tighten the track

tension.

If unit pulls to the left or right when a straight

path is desired, adjust the track tension. If the

unit is pulling to the left, tighten the left track

adjuster. If the unit is pulling to the right,

tighten the right track adjuster.

To adjust (Figure 46):

1. Tighten the adjuster nut to tighten the

track tension. Loosen the adjuster nut to

reduce track tension.

2. Check that unit tracks straight with no

pulling to either side.

HEIGHT ADJUSTER CABLE

ADJUSTMENT

(920020)

(Figure 47)

1. Make sure that height adjustment lock

finger is fully engaged (Figure 47).

2. Loosen jam nuts on cable mount

bracket.

3. Adjust the jam nuts to remove all cable

slack and bring the overtravel arm into

slight contact with the right end of the

slot in the height adjuster lock finger.

4. Tighten the jam nuts.

Figure 45

3/8" (9.5 mm)

1. Drive Wheel

2. Wheel Clip

3. Flange Nut

4. Bogie Wheel

5. Drive Axle

Figure 46

Track

Adjusters

OS7380

1. Height Adjuster Lock Finger

2. Overtravel Arm

3. Height Adjuster Cable

4. Jam Nuts

OS7229

Before adjusting ensure

that height adjuster lock

finger is fully engaged.

Pin on overtravel arm

makes slight contact

with end of slot.

Figure 47

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 47 48

Comments to this Manuals

No comments

Ariens 920014 COMPACT 24 LE Specifications Page 37

Comments to this Manuals

Related products and manuals for Snow throwers Ariens 920014 COMPACT 24 LE