Ariens 815034 Specifications download pdf (Page 23)

GB - 23

TROUBLESHOOTING

Problem Probable Cause Correction

The headlights do not

turn on or shine in the

wrong direction.

1. The ignition switch is not turned to the

headlight position.

1. Turn ignition switch to the headlight

position (see Operating Headlights on

page 15).

2. The snow thrower wire harness is not

connected to the main wire harness.

2. Connect the snow thrower wire harness

to the main wire harness (see Install

Snow Thrower Wire Harness on

page 12).

3. The headlights are out of adjustment. 3. Adjust the headlights (see Headlight

Adjustment on page 20).

Auger does not

engage.

1. Auger belt is broken. 1. Replace auger belt (see Auger Belt

Replacement on page 19).

2. PTO belt is broken. 2. Replace PTO belt (see PTO Belt

Replacement on page 18).

3. Shear bolt(s) have been sheared. 3. Replace shear bolt(s) (see Shear Bolt

Replacement on page 18).

4. Operator presence switch is not

depressed or is faulty.

4. See unit’s Owner’s Manual or contact

your dealer.

Snow thrower does not

touch the ground with

the height adjustment

pin in the lowest

position.

1. Snow thrower clearance is out of

adjustment.

1. Adjust snow thrower clearance (see Snow

Thrower Clearance Adjustment

(Figure 19) on page 20).

Chute does not rotate

or is hard to rotate.

1. Chute and / or chute crank is frozen in

place.

1. Thaw out chute and / or chute crank.

2. The chute crank needs to be lubricated. 2. Oil the bushings that hold the chute crank

to the chute crank bracket. See item 16 in

the Snow Chute and Chute Crank

Assembly illustration on page 28.

3. The chute needs to be lubricated. 3. Oil the base of the lower chute where it

rotates on the chute adapter. See item 31

and 36 in the Snow Chute and Chute

Crank Assembly illustration on page 28.

4. Chute crank is out of adjustment. 4. Adjust chute crank (see Chute Crank

Adjustment on page 21).

Chute deflector does

not operate properly.

1. Chute deflector cable(s) and / or chute

deflector is frozen in place.

1. Thaw out chute deflector cable(s) and / or

chute deflector.

2. The chute deflector needs to be

lubricated.

2. Oil the pivot point on the upper chute and

lower chute. See item 22 and 31 in the

Snow Chute and Chute Crank Assembly

illustration on page 28.

3. Chute deflector cable(s) are out of

adjustment.

3. Adjust chute deflector cables (see Chute

Deflector Cable Adjustment on page 21).

4. Chute deflector mounting hardware is not

tight enough.

4. Tighten chute deflector mounting

hardware (see Chute Deflector

Adjustment on page 21).

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 35 36

Comments to this Manuals

No comments

Ariens 815034 Specifications Page 23

Comments to this Manuals

Related products and manuals for Snow throwers Ariens 815034