Ariens HVZ 915085-2350 Specifications download pdf (Page 21)

GB - 21

TROUBLESHOOTING

PROBLEM PROBABLE CAUSE CORRECTION

Engine will not

crank/start.

1. Safety interlock system is not engaged or

is faulty.

1. Check safety interlock system (see Safety

Interlock System on page 10).

2. Fuel tank empty. 2. Fill fuel tank (see FILLING FUEL TANK

on page 11).

3. Discharged battery. 3. Charge battery (see Charging the Battery

on page 18).

4. Poor connection between battery and

battery cables.

4. Tighten battery cables and/or clean

battery and battery cables (see Cleaning

Battery and Battery Cables on page 18).

5. Spark plug wire(s) loose or spark plug(s)

faulty.

5. Connect spark plug wire(s) or replace

spark plug(s). Refer to Engine Manual for

detailed instructions.

6. Faulty electrical system. 6. Contact your Ariens Dealer.

7. Faulty engine. 7. Contact your Ariens Dealer.

Engine

runs

rough.

1. Choke engaged. 1. Disengage choke.

2. Air filter cartridge plugged. 2. Clean or replace air filter cartridge. Refer

to Engine Manual for detailed

instructions.

3. Faulty engine. 3. Contact your Ariens Dealer.

Unit does not move with

engine running when

using steering levers.

1. The transmission bypass lever is

engaged.

1. Disengage transmission bypass lever

(see MOVING UNIT MANUALLY on

page 12).

2. Faulty hydrostatic belt. 2. Replace hydrostatic belt (see

REPLACING HYDROSTATIC BELT on

page 20).

3. Faulty transmission. 3. Contact your Ariens Dealer.

PTO or mower blades

do not engage or shuts

off.

1. Operator presence switch not depressed. 1. Depress operator presence switch by

sitting on seat.

2. Faulty operator presence switch. 2. Contact your Ariens Dealer.

3. Electric clutch connector is loose or

disconnected.

3. Connect the electric clutch connector.

See REPLACING HYDROSTATIC BELT

on page 20 for the electric clutch

connector location.

4. Faulty PTO belt. 4. Replace PTO belt (see REPLACING PTO

BELT on page 19).

5. Faulty PTO switch, wires, connectors, or

clutch.

5. Contact your Ariens Dealer.

Engine overheats. 1. Engine oil level low. 1. Add engine oil. Refer to Engine Manual

for detailed instructions.

2. Cooling system plugged. 2. Clean cooling system. Refer to Engine

Manual for detailed instructions.

3. Faulty engine. 3. Contact your Ariens Dealer.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26

Comments to this Manuals

No comments

Ariens HVZ 915085-2350 Specifications Page 21

Comments to this Manuals

Related products and manuals for Lawnmowers Ariens HVZ 915085-2350