Ariens 985119 Specifications download pdf (Page 9)

GB - 9

ASSEMBLY

Install Hubs and Wheels

For Semi-Pneumatic Wheels: install bushings and

wheel/hub assemblies onto tractor axles. For all other

wheels: install hubs to axles and secure wheels to hubs

with hardware provided.

Install Kick Stand

Slide kick stand into the righthand side of the lower

bracket on the rear hitch. Secure it in position with the

adjusting handle. The hair pin holds kick stand in the

raised position.

Position Handlebar

IMPORTANT:

DO NOT damage ignition harness and

wires when positioning handlebar.

1. Position the handlebar right side up.

2. Move the left handle of the handlebar under the

right side of the frame, across the engine and out

between the left side of the frame and the PTO

control.

3. Rotate the handlebar into the mounting position.

4. Retain the handlebar in position with four

3/8-16 x 1 1/4 bolts and locknuts and tighten

hardware (Figure 6).

5. Connect the wiring harness from handlebar to the

unit.

6. Mount the Hi-Lo gear control handle assembly and

pivot to the left handlebar with a 1/2-13 x 3 1/2 bolt,

locknut, and washer (Figure 7).

Assemble Steering Brakes (Optional)

1. Remove nut and bolt from brake handle brackets

(Figure 8).

Left Hand Rod:

1. Hook the rear of the left hand brake rod into the left

side of the brake handle weldment.

NOTE:

Before installing on rear hitch, place the forward

end of the left hand brake rod below mufﬂer brace.

Figure 5

1. Adjusting Handle

2. Lower Bracket

3. Rear Hitch

4. Hair Pin

5. Kick Stand

DH0080

Figure 6

1. Ignition Switch

Harness

2. Ignition Switch

3. Instrument Panel

4. Control Lever

5. Handlebar (Left)

DH0020

Figure 7

1. Hi-Lo Control Handle

Assembly

2. Brake Handle Grip

3. Left Handlebar

4. 1/2-13 x 3 1/2 Hex Bolt

5. Adjust and Jam Nuts

6. Extension Rod

7. Hi-Lo Control Rod

8. Pivot

DH0040

Figure 8

1. Steering Brake

Handle

2. Instruction Plate

3. Left Hand Brake Rod

4. Right Hand Brake

Rod

5. Rear Hitch

6. Adjustment Bracket

7. Bolt and Nut (remove

ﬁrst)

8. Right Hand Brake

Assembly

9. Brake Handle

Weldment

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

Comments to this Manuals

No comments

Ariens 985119 Specifications Page 9

Comments to this Manuals

Related products and manuals for Lawnmowers Ariens 985119