Ariens 911183-LM21S Classic Specifications download pdf (Page 11)

CONTROLS AND FEATURES

See Figure 4 for locations.

WARNING: Improper operation

,_ can lead to injury. Learn what the

controls do and how they work.

Thoroughly read and understand

entire Operator Manual.

Handlebar

Adjust handlebar to a safe and comfortable

height. See HANDLEBAR HEIGHT on

page 20.

Recoil Starter Handle

When pulled, handle will turn engine over.

CUTTING HEIGHT ADJUSTMENT

CAUTION: AVOID INJURY. Read

and understand the entire Safety

section before proceeding.

Engine/Blade Control

CAUTION: Check function of

,_ Engine/Blade Control regularly.

Improper function of control could

cause injury.

The engine/blade control must be held

against the handlebar to start the engine and

blade.

Engine/blade control feature on mower stops

engine and blade within 3 seconds whenever

operator releases handlebar. Check this

feature frequently. If feature fails to operate,

disconnect spark plug wire and adjust or have

it repaired before using unit.

STOP

START and RUN

DANGER: Avoid injury from

,_ rotating blade.

ALWAYS shut off engine before

adjusting cutting height.

CAUTION: On self-propelled

models, both rear wheels must be

set at same height or traction

drive may not work properly.

Notch Cut grass length

LOW 1" (25 mm)

2 1-3/8" (35 mm)

3 1-3/4" (45 mm)

4 2-1/4" (57 mm)

5 2-3/4" (70 mm)

HIGH 3-1/4" (83 mm)

GB- 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 60 61

Comments to this Manuals

No comments