Ariens 927065 User Manual download pdf (Page 28)

7.7 40-INCH MOWER REPLACE THE

ELECTRIC CLUTCH (FIGURE 25)

Remove

1. Remove the mower deck from the unit.

2. Remove drive belt by depressing the idler arm to

provide slack.

3. Unbolt the clutch bracket.

4. Unbolt clutch from anti-rotation stop.

5. Remove bolt from center of spindle shaft. The

clutch should pull off the spindle.

Install

Clutch is installed in reverse order.

NOTE: Check keyways for burrs.

7.8 40-INCH MOWER REPLACE CLUTCH

SPINDLE BEARINGS

1. Remove the mower deck from the unit.

2. Remove drive belt by removing idler arm spring.

The clutch spindle has two bearings, one on each

side of the housing.

NOTE: Bearings are pressed in.

3. Unscrew the top bolt to remove the sheave and

key. The top bearing is accessible.

4. Unbolt housing from the mower deck to gain

access to the second bearing.

The bearings should be replaced, do not service.

Assemble in reverse order.

•i

7-28

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 43 44

No comments

Ariens 927065 User Manual Page 28