Ariens 22-Ton Log Splitter Specifications download pdf (Page 17)

10. Install the valve link onto the valve body,

as shown, using a 1/4 x 1 inch long clevis

pin. Secure the clevis pin with a cotter

pin (bend the ends of the cotter pin to

make it secure).

11. Install the valve handle onto the valve link

using a 1/4 x 3/4 inch long clevis pin.

Secure the clevis pin with a cotter pin

(bend the ends of the cotter pin to make

it secure).

12. Attach the valve handle to the valve spool

using a 1/4 x 1 inch long clevis pin.

Secure the clevis pin with a cotter pin

(bend the ends of the cotter pin to make

it secure). Attach the knob to the valve

handle, if necessary.

13. Attach the high-pressure hose from the

filter assembly to the fitting on the side of

the valve. Securely tighten the hose fit-

ting.

NOTE: The high-pressure hose is self-seal-

ing and does not require any type of sealing

material. Tighten the fitting with a 10 inch

crescent wrench.

815-672-8596 15 Iron & Oak

Assembly Instructions

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 51 52

No comments

Ariens 22-Ton Log Splitter Specifications Page 17