Ariens 915155-Zoom 42 Carb Specifications download pdf (Page 25)

GB - 25

TROUBLESHOOTING

PROBLEM PROBABLE

CAUSE

CORRECTION

Engine will not

crank/start.

1. Safety interlock

system is not

engaged or is

faulty.

1. Check safety interlock system (see Safety

Interlock System on page 12).

2. Fuel tank is

empty.

2. Fill fuel tank (see FILLING FUEL TANK on

page 13).

3. Discharged

battery.

3. Charge battery (see Charging the Battery

on page 21).

4. Poor connection

between battery

and battery

cables.

4. Tighten battery cables and/or clean battery

and battery cables (see Cleaning Battery

and Battery Cables on page 21).

5. Spark plug wire(s)

loose or spark

plug(s) faulty.

5. Connect spark plug wire(s) or replace spark

plug(s). Refer to Engine Manual for detailed

instructions.

6. Faulty electrical

system.

6. Contact your Ariens Dealer.

7. Faulty engine. 7. Contact your Ariens Dealer.

Engine runs

rough.

1. Choke engaged. 1. Disengage choke.

2. Air filter cartridge

plugged.

2. Clean or replace air filter cartridge. Refer to

Engine Manual for detailed instructions.

3. Faulty engine. 3. Contact your Ariens Dealer.

Unit does not

move with

engine running

when using

steering levers.

1. The transmission

bypass lever is

engaged.

1. Disengage transmission bypass lever (see

MOVING UNIT MANUALLY on page 15).

2. Faulty hydrostatic

belt.

2. Replace hydrostatic belt (see REPLACING

HYDROSTATIC BELT on page 24).

3. Faulty

transmission.

3. Contact your Ariens Dealer.

PTO or mower

blades do not

engage or shut

off.

1. Operator

presence switch

not depressed.

1. Depress operator presence switch by sitting

on seat.

2. Faulty operator

presence switch.

2. Contact your Ariens Dealer.

3. Faulty PTO belt. 3. Replace PTO belt (see REPLACING PTO

BELT on page 23).

4. Faulty PTO

switch, wires,

connectors, or

clutch.

4. Contact your Ariens Dealer.

Engine

overheats.

1. Engine oil level

low.

1. Add engine oil. Refer to Engine Manual for

detailed instructions.

2. Cooling system

plugged.

2. Clean cooling system. Refer to Engine

Manual for detailed instructions.

3. Faulty engine. 3. Contact your Ariens Dealer.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31 32 33

Comments to this Manuals

No comments