Ariens 915155-Zoom 42 Carb Specifications download pdf (Page 18)

GB - 18

MOWER DECK REMOVAL AND

INSTALLATION

Remove

(Figure 7)

1. Remove PTO belt from the engine drive

pulley (see REPLACING PTO BELT on

page 23).

NOTE: Perform step 2 and 3 for the right and

left side of unit.

2. Disconnect drag link from the front deck

bracket.

3. Disconnect front and rear trunnions from

the lift arms.

4. Slide mower deck out from under unit.

Install

(Figure 7)

1. Slide mower deck under unit.

NOTE: Perform step 2 and 3 for the right and

left side of unit.

2. Connect drag link to front deck bracket.

3. Connect front and rear trunnions to lift

arms.

4. Install PTO belt on the engine drive

pulley (see REPLACING PTO BELT on

page 23).

5. Level and adjust pitch of mower deck

(see LEVELLING AND ADJUSTING

PITCH OF MOWER DECK on page 18).

LEVELLING AND ADJUSTING

PITCH OF MOWER DECK

NOTE: Adjust on a level surface, with the

tires inflated to the correct air pressure (see

SPECIFICATIONS on page 27).

Three measurements are required to level

and adjust the pitch of the mower deck.

1. The distance from the mower blades to

the ground.

2. The forward pitch of the mower blades.

3. The pitch of the mower blades from

side-to-side.

The Distance From The Mower

Blades To The Ground

(Figure 8)

• In the lowest cutting position should be

1in. +

1/4 in. (2.54 cm + 0.64 cm).

• In the highest cutting position should

be 4 in. +

1/4 in. (10.16 cm + 0.64 cm).

Figure 7

1. Rear Trunnion

2. PTO Belt

3. Mower Deck

4. Drag Link

5. Front Trunnion

6. Lift Arms

1

2

3

4

6

5

6

Figure 8

1. Mower Deck

2. Mower Blade

3. Ground

Lowest Cutting Position

1 in. +

1/4 in. (2.54 cm + 0.64 cm)

1

3

2

Highest Cutting Position

4 in. +

1/4 in. (10.16 cm + 0.64 cm)

1

3

2

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 32 33

Comments to this Manuals

No comments