Ariens 936042 Specifications download pdf (Page 10)

OPERATION

The operation of any tractor can result in foreign objects thrown into the eyes, which can

result in severe eye damage. Always wear safety glasses or eye shields while operating

your tractor or performing any adjustments or repairs. We recommend standard safety

glasses or a wide vision safety mask worn over spectacles.

HOW TO USE YOUR TRACTOR

TO SET PARKING BRAKE (See Fig. 6)

Your tractor is equipped with an operator presence sens-

ing switch. When engine is running, any attempt by the

operator to leave the seat without first setting the parking

brake will shut off the engine.

• Depress clutch/brake pedal (B) into full "BRAKE" posi-

tion and hold.

• Place parking brake lever (C) in "ENGAGED" position

and release pressure from clutch/brake pedal. Pedal

should remain in "BRAKE" position. Ensure parking

brake will hold tractor securely.

• Never use the choke to stop the engine.

iMPORTANT: LEAVING THE IGNITION SWITCH IN ANY

POSITION OTHER THAN "STOP" WILL CAUSE THE BATTERY

TO DISCHARGE AND GO DEAD.

NOTE: Under certain conditions when tractor is standing

idle with the engine running, hot engine exhaust gases may

cause "browning" of grass. To eliminate this possibility, al-

ways stop engine when stopping tractor on grass areas.

CAUTION: Always stop tractor corn=

pletely, as described above, and set

parking brake before leaving the opera=

tot's position.

TO USE THROTTLE CONTROL (D) (See Fig. 8)

Always operate engine at full speed (fast).

• Operating engine at less than full speed (fast) reduces

the engine's operating efficiency.

• Full speed (fast) offers the best mower performance.

Fig. 6

STOPPING (See Fig. 7)

MOWER BLADES

• To stop mower blades, place attachment clutch control

in the "DISENGAGED" position (r_).

(_il) ATTACHMENT (IJ_) ATTACHMENT

CLUTCH SWITCH CLUTCH SWITCH

"DISENGAGED .... ENGAGED"

Fig. 7

GROUND DRIVE

• To stop ground drive, depress brake pedal all the way

down.

• Move motion control lever (J) to neutral position.

ENGINE

• Move throttle control (D) between half and full speed

(fast) position.

NOTE: Failure to move throttle control between half and full

speed (fast) position, before stopping, may cause engine

to "backfire".

• Turn ignition key (F) to "STOP" position and remove

key. Always remove key when leaving tractor to prevent

unauthorized use.

Fig. 8

TO MOVE FORWARD AND BACKWARD

(See Fig. 9)

The direction and speed of movement is controlled by the

motion control lever. (J)

Fig. 9

• Start tractor with motion control lever in neutral position.

• Release parking brake.

• Slowly move motion control lever to desired position.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 63 64

Comments to this Manuals

No comments

Ariens 936042 Specifications Page 10

Comments to this Manuals

Related products and manuals for Tractor Ariens 936042