Ariens Snow Blower 920006 User Manual download pdf (Page 21)

GB - 21

SHEAR BOLTS

IMPORTANT: Use only Ariens shear bolts for

replacement. Use of any other type of shear

bolt may result in severe damage to unit and

may void the warranty.

Occasionally a foreign object may enter the

auger/impeller housing and jam the auger,

breaking shear bolts which secure the auger

to the shaft (Figure 15). This allows auger to

turn freely on the shaft which may help

prevent damage to gear case and its

components.

For Replacement:

1. Align shear bolt holes in auger with

shear bolt holes in the shaft.

2. Drive shear bolt through hole (if shear

bolt was broken this will drive remaining

part from shaft).

3. Secure shear bolt with nut.

DISCHARGE CHUTE DEFLECTOR

Deflector must stay in selected position while

throwing snow.

To adjust, loosen then retighten the wing

knob to desired tension (Figure 16).

DISCHARGE CHUTE

If discharge chute does not stay in position

while operating, tighten nut on carriage bolt at

pivot point to increase tension on spring

(Figure 17).

Figure 15

1. Auger

2. Shear Bolts

OS7150

Figure 16

OS8055

1. Wing Knob

2. Discharge Chute Deflector

3. Discharge Chute

Figure 17

OS7177

1. Spring

2. Nut

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 33 34

Comments to this Manuals

No comments

Ariens Snow Blower 920006 User Manual Page 21

Comments to this Manuals

Related products and manuals for Snow throwers Ariens Snow Blower 920006