Ariens 917012 Specifications download pdf (Page 8)

EN - 8

Never store the equipment with fuel in the

tank inside a building where fumes might

reach an open flame or spark. Allow the

engine to cool before storing in any

enclosure.

Clear debris from movable parts, but only

when the power source is shut off. DO NOT

spray water to clean unit.

Check to be sure all nuts and bolts are tight

to assure the equipment is in safe working

condition.

For extended storage, shut off fuel and

clean unit thoroughly. See engine manual for

proper storage.

ALWAYS remove spark plug wire from spark

plug before inspecting or working on this

unit.

DO NOT touch unit parts which might be hot

from operation. Allow parts to cool before

attempting to maintain, adjust or service.

Stop and inspect equipment if there is an

unusual vibration. Repair, if necessary,

before restarting. Never make adjustments

or repairs without first disconnecting the

spark plug wire.

Keep all hardware properly tightened.

Maintain or replace safety and instruction

labels, as necessary.

Check attachment components frequently. If

worn or damaged, replace with

manufacturer’s recommended parts.

ALWAYS keep protective structures, guards,

and panels in good repair, in place and

securely fastened. NEVER modify or

remove safety devices.

Hydraulic fluid can result in severe burns.

Fluid in hydraulic system can penetrate skin

and result in serious injury or death.

• Be sure to stop the engine and

relieve hydraulic pressure before

doing any work on hydraulic parts.

• Keep body and hands away from pin

holes or nozzles which expel

hydraulic fluid when under pressure.

Use paper or cardboard, not hands,

to search for leaks.

• Ensure all hydraulic fluid connections

are tight and all hydraulic hoses and

lines are in good condition before

applying pressure to system.

• FOREIGN FLUID INJECTED INTO

BODY can result in gangrene. Fluid

must be surgically removed within a

few hours by a doctor familiar with

this form of injury.

• Do not adjust the pressure settings

on the hydraulic pump or valve.

ALWAYS maintain unit in safe operating

condition. Damaged or worn out muffler can

cause fire or explosion.

Personal Protection

Wear adequate safety shoes and protective

gloves.

DO NOT wear loose clothing or jewelry and

tie back hair that may get caught in moving

parts.

Protect eyes, face and head from objects

that may be thrown from unit. Wear

appropriate hearing protection. Always wear

safety goggles or safety glasses with side

shields when operating.

Before Operating

Inspect unit before each use for: missing or

damaged decals and shields. Replace or

repair as needed.

Read, understand, and follow all instructions

in the manual and on the machine before

starting.

Understand:

• How to operate all controls

• The functions of all controls

• How to STOP in an Emergency

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 25 26

Comments to this Manuals

No comments