Ariens 917012 Specifications download pdf (Page 6)

EN - 6

RULES FOR SAFE OPERATION

This cutting machine is capable of amputating

hands and feet and throwing objects. Failure

to observe the following safety instructions

could result in serious injury or death.

The following safety instructions are based

on recommendations found in ANSI standard

B71.7-2013 (Draft).

Never place hands or any

part of the body between a

log and any part of the log

splitter.

Hold logs on sides when

loading. Keep hands and

feet away from cylinder,

wedge, and partially split

logs.

Do not split logs against

the grain.

Split logs end to end in the

direction of the grain only.

2. WARNING!

To prevent serious injury or

death from escaping

hydraulic fluid:

• ALWAYS keep body

and hands away

from pin holes or

nozzles which eject

hydraulic fluid under

pressure.

Escaping hydraulic fluid

can puncture skin and

cause blood poisoning.

3. WARNING!

Maximum towing speed of

45 mph (72.4 kph).

4. CAUTION!

No smoking, No sparks, No

flames.

Never fill fuel tank when

engine is running, hot or

unit is indoors.

Never overfill fuel tank.

Replace fuel cap

securely and clean up

spilled fuel.

MAX. 45mph (72.42kph)

Training

Only the user can prevent and is responsible

for accidents or injuries occurring to

themselves, other people or property.

Read the Operator's manual completely

before attempting to use this log splitter.

Do not allow anyone to operate your log

splitter who has not read the Operator's

Manual or has not been instructed on the

safe use of the splitter.

Never allow children or untrained adults to

operate this machine.

Many accidents occur when more than one

(1) person operates the log splitter. If a

helper is assisting in loading logs to be split,

never actuate controls until the helper is

clear of the area.

Never allow anyone to ride on the machine.

Never transport cargo on the log splitter.

High fluid pressures are developed in

hydraulic log splitters. Pressurize hydraulic

fluid escaping through a pin hole opening

can puncture skin and cause severe blood

poisoning. Therefore, the following

instructions should be heeded at all times.

(a) Do not operate the unit with frayed,

kinked, cracked or damaged hoses,

fittings, or tubing.

(b) Stop the engine and relieve

hydraulic system pressure before

changing or adjusting fittings, hoses,

tubing, or other system components.

(c) Do not adjust the pressure settings

of the pump or valve.

(d) Do not check for leaks with your

hand. leaks can be located by passing

cardboard or wood over the suspected

area. Look for discoloration. If injured

by escaping fluid, see a doctor at once.

Serious infection or reaction can

develop if proper medical treatment is

not administered immediately.

Keep the operator zone and adjacent area

clear for safe, secure footing.

1 2 3 4 5 6 7 8 9 10 11 ... 25 26

Comments to this Manuals

No comments