Ariens 917012 Specifications download pdf (Page 14)

EN - 14

Front Stand (Item 6)

Front stand must be locked in the down

position whenever the unit is in use and in the

transport position when moving or towing the

unit.

(Figure 9)

1. Remove hair pin from clevis pin and

remove clevis pin from tongue bracket.

2. Rotate stand up or down until the top

edge of the handle on the stand aligns

with the upper or lower notch in the

tongue bracket.

3. Insert clevis pin into tongue bracket and

insert hair pin.

Rear Stabilizer (Item 12)

(Figure 10)

Rear stabilizer must be positioned down and

locked in place when operating in the

horizontal position.

1. Remove hair pin from upper lock pin and

slide lock pin out from brackets.

2. Rotate rear stabilizer down until holes in

stabilizer align with holes in brackets.

3. Insert lock pin all the way through

brackets and stabilizer.

4. Reinstall hair pin.

IMPORTANT: Rear stabilizer must be locked

in the transport position before towing unit or

before placing beam in vertical operating

position.

OPERATION

FILLING FUEL TANK

To add fuel to the fuel tank:

1. Clean fuel caps and surrounding area to

prevent dust, dirt, and debris from

entering fuel tanks.

2. Remove fuel caps.

IMPORTANT: Refer to Engine Manual for

correct type and grade of fuel.

3. Fill fuel tank to the bottom of filler neck.

See

SPECIFICATIONS on page 22 for

fuel tank capacity.

CAUTION: Front stand must be

locked in the transport position

before towing the unit.

Figure 9

Remove hair

pin and clevis

pin and rotate

stand up or

down.

Reinstall clevis

pin and hair pin.

Notch

Figure 10

Remove hair

pin and slide

lock pin out.

Insert lock pin

through

brackets and

insert hair pin.

Transport Position

Work Position

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 25 26

Comments to this Manuals

No comments