Ariens Promaster 144Z Specifications download pdf (Page 26)

GB - 26

TROUBLESHOOTING

PROBLEM PROBABLE CAUSE CORRECTION

Engine does not

crank.

1. PTO engaged.

2. Parking brake disengaged.

3. Loose or corroded battery cables.

4. Discharged battery.

5. Faulty starter.

1. Disengage PTO.

2. Engage parking brake.

3. Clean and tighten battery cables (see

Clean Battery on page 19).

4. Charge battery (see Charging the

Battery on page 19).

5. See your Gravely Dealer.

Engine cranks but

does not start.

1. Fuel tank empty.

2. Faulty spark plug.

3. Air cleaner is plugged or dirty.

4. Fuel filter is dirty.

5. Faulty engine.

1. Fill fuel tank (see FILLING FUEL TANK

on page 14).

2. Replace spark plug. Refer to Engine

Manual.

3. Clean or replace air cleaner. Refer to

Engine Manual.

4. Clean or replace fuel filter. Refer to

Engine Manual.

5. Refer to Engine Manual or see your

Gravely Dealer.

Battery light does not

light up when starting

engine.

1. Discharged battery. 1. Charge battery (see Charging the

Battery on page 19).

Oil pressure light is

on.

1. Oil pressure is low. 1. Refer to Engine Manual.

Engine continues to

run when ignition key

is in the off position.

1. Ignition ground wire disconnected.

2. Ignition switch failure.

1. Connect ground wire to clean metal

surface.

2. Replace ignition switch (see your

Gravely Dealer).

PTO or mower blades

do not engage or shut

off.

1. Operator presence switch not

depressed.

2. Faulty PTO switch.

1. Depress operator presence switch by

sitting on seat.

2. Check the electrical system to the

clutch for damage or wear. See your

Gravely Dealer.

Unit does not drive.

1. Parking brake engaged.

2. Transmission bypass levers open.

3. Hydraulic oil level low.

4. Faulty hydraulic drive system.

1. Disengage parking brake.

2. Close transmission bypass levers (see

MOVING THE UNIT WITH THE

ENGINE OFF on page 15).

3. Add hydraulic oil (see Check Hydraulic

Fluid Level on page 17).

4. See your Gravely dealer.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments